Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Thru Hull Exhaust Question >

Thru Hull Exhaust Question

Notices

Thru Hull Exhaust Question

Old 02-16-2012, 10:17 AM
  #1  
Banned
Thread Starter
 
Join Date: Apr 2011
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default Thru Hull Exhaust Question

I've got an older 221 Liberator and last year upgraded the engine significantly. The tips exit out the back on the sides similar to this. http://www.google.com/imgres?hl=en&s...A&tx=125&ty=67

The tips have baffles in them for noise (swirl) and anti back flow. This quiets it down to a reasonable level, maybe to reasonable. I called Corsa and they can custom make tips for it without a baffle so it will be straight through, but will have a back-flow flap inside for about $400 (I can't use standard since my opening is oval). How restrictive are these stock baffles? Do you guys think it's worth changing them?

Last edited by brivander; 02-16-2012 at 02:45 PM.
brivander is offline  
Old 02-16-2012, 10:34 AM
  #2  
Registered
 
Join Date: May 2010
Posts: 638
Likes: 0
Received 0 Likes on 0 Posts
Default

Can't you just drill the baffles out? How are they made? What size motor is in it?
GTOFFSHORE is offline  
Old 02-16-2012, 11:22 AM
  #3  
Banned
Thread Starter
 
Join Date: Apr 2011
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Poker~N~Run
Can't you just drill the baffles out? How are they made? What size motor is in it?
Well, I don't know (boat is 20 ft up on a rack for the winter), I know they are welded in, but I'd like something there for anti-back-flow, just in case.

502, dynoed 540hp.
brivander is offline  
Old 02-16-2012, 11:33 AM
  #4  
Platinum Member
Platinum Member
 
jeff32's Avatar
 
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,711
Received 365 Likes on 244 Posts
Default

less back flow since exhaust are on the sides... but good question!
jeff32 is online now  
Old 02-16-2012, 11:34 AM
  #5  
Registered
 
Join Date: Jan 2010
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

Not restrictive at all.
basically theres two flaps in the tip that will fold out/or up in the even water backs up into the tip. Preety much lay flat when exhaust is pushed outwards throught the tip.
been a good product for me!
powerplay260 is offline  
Old 02-16-2012, 11:39 AM
  #6  
Registered
 
Join Date: Nov 2000
Location: Glastonbury, CT
Posts: 1,028
Likes: 0
Received 43 Likes on 24 Posts
Default

I lost a motor due to missing side baffles on my donzi Icame off plane the motor died and water when up the exhaust and into the motor. On restart it took off the top of the pistons with the compression
boomer is offline  
Old 02-16-2012, 11:45 AM
  #7  
Registered
 
Join Date: May 2004
Location: Okanagan Falls BC. Canada
Posts: 596
Likes: 0
Received 1 Like on 1 Post
Lightbulb

Here are some tips from CPperformance with built in flappers ,no mufflers. Since yours is side exhaust it's even more remote to get water surge into your exhaust valves.http://www.cpperformance.com/c-465-side-exit-tips.aspx

I did my through transom exhaust system recently with flappers and bought removable mufflers from Rex marine, in case the popo is around some of the lakes where noise levels are restricted.Had to fabricate the outside tips because of the compound curves different from what was available from vendors.



spectras only is offline  
Old 02-16-2012, 11:59 AM
  #8  
Registered
 
Join Date: May 2004
Location: Okanagan Falls BC. Canada
Posts: 596
Likes: 0
Received 1 Like on 1 Post
Default

Sound with through hub exhaust

http://www.youtube.com/watch?v=l_axHfmDBw8

After the through transom install

http://www.youtube.com/watch?v=WD4mq...eature=related
spectras only is offline  
Old 02-16-2012, 12:15 PM
  #9  
Banned
Thread Starter
 
Join Date: Apr 2011
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by powerplay260
Not restrictive at all.
basically theres two flaps in the tip that will fold out/or up in the even water backs up into the tip. Preety much lay flat when exhaust is pushed outwards throught the tip.
been a good product for me!
You mean the Corsa I assume, I know those are great, but do you think the stock ones are restrictive? They sure seem like they would be.

Last edited by brivander; 02-16-2012 at 12:43 PM.
brivander is offline  
Old 02-16-2012, 12:16 PM
  #10  
Banned
Thread Starter
 
Join Date: Apr 2011
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by spectras only
Sound with through hub exhaust

http://www.youtube.com/watch?v=l_axHfmDBw8

After the through transom install

http://www.youtube.com/watch?v=WD4mq...eature=related
Very nice!
brivander is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.