Leak Proof Trim Caps?
03-22-2006 | 01:11 PM
#24
Registered
Joined: Mar 2005
Posts: 1,892
Likes: 1
From: tulsa, oklahoma
Re: IF they leak call me the manufacturer!
Originally Posted by turbosonic1
I have noticed that some of you clam our trim pump caps leak. Please check for these two reasons.
1. Make sure the o-ring is in the cap , between the thread area at the top of the cap. It is black and you can see it once you remove the cap.
2. For a period of time (were not sure how long) Mercury drilled a small hole in the threads on the white plastic tank where the cap threads on to get the unit to vent. This will cause a leak.
Please call us at 949-713-7051and we will fax you a Product Information Bulletin on how to handle it.
Lu Lyall
Lyall Turbosonics, Inc.
949-7163-7051
1. Make sure the o-ring is in the cap , between the thread area at the top of the cap. It is black and you can see it once you remove the cap.
2. For a period of time (were not sure how long) Mercury drilled a small hole in the threads on the white plastic tank where the cap threads on to get the unit to vent. This will cause a leak.
Please call us at 949-713-7051and we will fax you a Product Information Bulletin on how to handle it.
Lu Lyall
Lyall Turbosonics, Inc.
949-7163-7051
03-22-2006 | 03:22 PM
#29
Registered
Joined: Mar 2002
Posts: 3,459
Likes: 1
From: Winnipesaukee
