try this guy
http://www.ebay.com/sch/tubelight/m.html

I bought his stuff for under the counter and under the cabinet lights in my kitchen. Has many colors, and you can buy a music controller for them. Comes with remote control and transformer. The strips are about 1/2 or so wide and less than 1/4" thick.

Takes a couple week s to get from China, but worth the wait. The guy answers all emails promptly.

I bought three strips premade to the length I wanted, three transformers, and three remotes (1 can control them all), all for around 100 bucks.

http://www.youtube.com/watch?v=OdFSc0HEeEg

Here is some of jons work. He is top notch.

Believe this is yours.

http://www.youtube.com/watch?v=Gm8h9...eature=channel

Yes that is my boat. And yes john does great work.

I would prefer RGB, but I'm installing them inside of my speakers behind the grill and the RGB are all 1/2" wide. I bought a 15' roll of blue from a local car audio shop that are only 5/16" that will work with min mods to my grills. Anything wider wouldn't work.

Thanks for the comments Matt and Shay.

The RGB controller I used in Therapy Sessions boat has an aux input instead of a mic. Yes, it's RGB, but you could still use it, just set the color to stay on red, or whichever color you prefer. Its the million color controller from Oznium.

John used RGS'S on all of my speakers behind the billet grills and cup holders, but he used acrylic speaker rings behind all of the grills and he attached the RGB strips to the acrylic rings.

Considered the acrylic rings, but prefer to light the inside of the speakers.

If I separate my 2 pair of speakers and sub into 3 branches and connect to the Oznium controller, will they flash to music at 3 different beats if set to blue only, or will the 2 branches on the R and G terminal not lite up since there won't be any voltage going to them, if I'm thinking right.

1st one with the lites just laying inside for an pic. It is really bright in dark.

I like the look of that!

Thanks. Taking some work to make them fit behind the grill and run the wiring, but should look good when all are installed.


Just checked out the Oznium controller. I see that is a 4 channel. Can you control each channel separately?
Know of a single channel controller with line-in?
Thanks,
BTW, Nice installs!