First engine run (vid) - exhaust reversion help needed!

Reply Subscribe

Thread Tools

04-08-2012, 09:45 PM

#11

Ted G

Charter Member

iTrader: (1)

Join Date: Jan 2001

Location: Edgerock Baby!!

Posts: 7,663

Likes: 0

Received 1 Like on 1 Post

Just for info, those risers needed about 6 inches of rubber hose to connect with the thru hulls in the transom on a standard bravo setup. Here is a pic of one set in my new boat.

Attached Thumbnails

First engine run (vid) - exhaust reversion help needed!-img_0371-large-.jpg

__________________
Chesapeake Bay Powerboat Association
www.cbpba.com

05-14-2012, 03:38 PM

#12

EstorilM

Registered

Thread Starter

Join Date: Mar 2012

Location: Chantilly, VA

Posts: 27

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by Ted G

Just for info, those risers needed about 6 inches of rubber hose to connect with the thru hulls in the transom on a standard bravo setup. Here is a pic of one set in my new boat.

Wow those look nice, how's the condition of the remaining set? Can you shoot me an email to alex @ athomasphoto (.) com with an offer? I talked to SMI the other day - they were really helpful with the spec sheet that I'm going to fill out.

I do work at a fabrication shop so worst case I'll just extend them myself, but it's all about time.