Centurion Enzo with 6 Shadow Casters and full of red LED's
#1
Registered
Thread Starter
Join Date: Apr 2005
Location: Paducah
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Centurion Enzo with 6 Shadow Casters and full of red LED's
I've had this boat several times over the past few years. It started with a little bit of lighting, and a minor stereo. Now it's had the stereo upgraded, lighting upgraded, and the ballast upgraded. Here are some specs of what it has now:
2007 Centurion Enzo with 2011 model Gladiator tower
Stereo:
Alpine CDA-9886M with helm and transom remotes
(2) Wet Sounds Syn4 amps
(1) Wet Sounds Syn1 amp
(8) SS-65 in-boat speakers
(4) Pro80's
(1) 12" XXX sub under the helm ported
WS-420
Stinger SPP2250 battery
Stinger SPP925 battery
Perko Switch
Lighting:
(14) Custom made 1/2" acrylic cupholder LED rings
1/2" acrylic and LED's under Pro80 grills
1/2" acrylic under billet stereo enclosure
(3) Shadow Caster blue transom LED's ($600 each)
(3) Shadow Caster RGB transom LED's ($1000 each)
18" red LED sticks under each console
1/4" acrylic foot-print for amps edge-lit with LED's
Ballast:
(1) 1500# Enzo sac starboard
(1) 1500# Enzo sac port side
(1) 500# bow sac
Fly-High 3-way manifold (to fill external sacs)
(4) Jabsco ballast pumps (2 fill port side Enzo sac, 1 fills starboard sac, 1 fills bow or selected external bag through manifold)
(4) 1" thru-hull intakes and 1" ball valves (1 for each pump)
Trailer:
Fulton F2 twin-wheel jack
Fulton F2 winch
2007 Centurion Enzo with 2011 model Gladiator tower
Stereo:
Alpine CDA-9886M with helm and transom remotes
(2) Wet Sounds Syn4 amps
(1) Wet Sounds Syn1 amp
(8) SS-65 in-boat speakers
(4) Pro80's
(1) 12" XXX sub under the helm ported
WS-420
Stinger SPP2250 battery
Stinger SPP925 battery
Perko Switch
Lighting:
(14) Custom made 1/2" acrylic cupholder LED rings
1/2" acrylic and LED's under Pro80 grills
1/2" acrylic under billet stereo enclosure
(3) Shadow Caster blue transom LED's ($600 each)
(3) Shadow Caster RGB transom LED's ($1000 each)
18" red LED sticks under each console
1/4" acrylic foot-print for amps edge-lit with LED's
Ballast:
(1) 1500# Enzo sac starboard
(1) 1500# Enzo sac port side
(1) 500# bow sac
Fly-High 3-way manifold (to fill external sacs)
(4) Jabsco ballast pumps (2 fill port side Enzo sac, 1 fills starboard sac, 1 fills bow or selected external bag through manifold)
(4) 1" thru-hull intakes and 1" ball valves (1 for each pump)
Trailer:
Fulton F2 twin-wheel jack
Fulton F2 winch
#4
Registered
Thread Starter
Join Date: Apr 2005
Location: Paducah
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
#5
AKA "BAZOOKA JOE"
Platinum Member
#6
Registered
Thread Starter
Join Date: Apr 2005
Location: Paducah
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Check out www.optxmarine.com cool LEDs
#7
AKA "BAZOOKA JOE"
Platinum Member
Now let me see were in a forum, I make a recommendation on a product I like, now I'm spaming I am a Platinum Member and have been a paying member since 2001, your a free member with an opinion that's great....respect others I do.
#8
Registered
Thread Starter
Join Date: Apr 2005
Location: Paducah
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Ok, thanks for the recommendation on the lights.
I choose not to be a paying member because I have no need for the pRon pics in the other forums. I had considered it before this was sold out, but after that, no chance.
I choose not to be a paying member because I have no need for the pRon pics in the other forums. I had considered it before this was sold out, but after that, no chance.