.


Awesome-ness!

Can someone explain in layman's terms, the technology behind this hull's bottom that propels the boat to 100MPH with a single Racing Merc 600SCi engine?


Thanks in advance!


Photo Credit: SportBoat Magazine

Your Power & Performance Source


I got my copy!

Pretty simple... the hull works and is safe, go figure...

Four steps and a pad....

Maybe it's the color orange? Dcb also?

.


Perhaps we can stick to the technical side of things in this thread

and understand just how OL makes the observed speeds with a single 600sci

3rdchildhood's : "4 steps and a pad" is a good start in our technical analysis.





.

"4 steps and a pad"
That's probably about the best you will get. I wouldn't wait for anyone from OL to come on here and give a dissertation on their bottom technology, especially considering your connection to a boat builder.
Suffice to say that it not only works, but works quite well. What an awesome little boat. I didn't expect anything less from the guys at OL.
Eddie

Is the 600 Sci stock?

lots of unobtainium, a little billet unbreakium and I heard from a secret inside source who wishes to remain anonymous that they are adding a few grams of unflipium to the unbreakium alloy.

2005 39 OL quatro with 700's ran 112, 29' full pleasure in testing phase with a stock 600 runs 102.. 2 patents on hold for the technology they use on the lay up on the hull.... boats are fast, and setting the bar for everyone else who wants to go fast

That's a nice looking "Pickleknife"