Slide in mufflers
#1
Registered
Thread Starter
Join Date: Sep 2011
Location: Vancouver Washington
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Slide in mufflers
I have come to the conclusion that though the boat sounds really cool I do not think some of the house boat people in the marina like the sond.....Some guy blows a airhorn every time we go past his place
Not sure which is worth my unmuffled big block or his airhorn
Can anyone sugest a good slip in muffler for my through hull slash cut tips?
Thanks all
Not sure which is worth my unmuffled big block or his airhorn
Can anyone sugest a good slip in muffler for my through hull slash cut tips?
Thanks all
#2
Registered
Join Date: May 2004
Location: Okanagan Falls BC. Canada
Posts: 596
Likes: 0
Received 1 Like
on
1 Post
you can get them from CP Performance the quickest in your area http://www.cpperformance.com/c-472-s...silencers.aspx
Rex Marine , Hardin Marine , just about every one of them have it.
Rex Marine , Hardin Marine , just about every one of them have it.
#6
Registered
I have some GBB clamp-on style mufflers and looked closely at their new slip-ins. They look like a good product with minimal power loss. Or buy your own airhorn? Ha, good luck.
#8
Registered
Join Date: Jan 2009
Location: Metamora MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
you can get them from CP Performance the quickest in your area http://www.cpperformance.com/c-472-s...silencers.aspx
Rex Marine , Hardin Marine , just about every one of them have it.
Rex Marine , Hardin Marine , just about every one of them have it.
#9
Registered
iTrader: (2)
Join Date: May 2012
Location: Gibraltar, MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
I am cutting out the stock inline "twist" baffles since apparently they really hurt performance at similar power levels to me and can install these when I need to. My tips are only about 6" long on the short side of the angle cut so these were about my only option. These will hurt performance too, but I can have them out in seconds.
Last edited by BBCLiberator; 07-14-2012 at 08:41 AM.