H.P. Mafia dyno vid 1288 hp 1090 ft lbs on 93 oct
#1
Registered
Thread Starter
H.P. Mafia dyno vid 1288 hp 1090 ft lbs on 93 oct
My lastest try at big pump gas power. Not bad for non EMS motor.
1288 hp
1090 ft lbs ..over 1000ft lbs after 3550 rpm and all the way up
1128* egt's are on the real cool side and we have some more power to pull out with valve time and tune.
http://youtu.be/eeqsiKk5ufY
1288 hp
1090 ft lbs ..over 1000ft lbs after 3550 rpm and all the way up
1128* egt's are on the real cool side and we have some more power to pull out with valve time and tune.
http://youtu.be/eeqsiKk5ufY
Last edited by WeaponX; 08-10-2012 at 07:48 PM.
#3
Registered
Thread Starter
598 cid
12-71
Big Cheif
custom one off Diamond pistons
Our new intercooler !!
RR rods
Crazy Isky cam.
Dry sump
I'm going to laminate the parts specs so I can keep them forever. I'll copy the sheet and post the #'s complete
12-71
Big Cheif
custom one off Diamond pistons
Our new intercooler !!
RR rods
Crazy Isky cam.
Dry sump
I'm going to laminate the parts specs so I can keep them forever. I'll copy the sheet and post the #'s complete
#7
Registered
Thread Starter
Just adding another pump gas run to this for a guy.
93 octane 23.5 psi 2.8 litre ....720+ hp on the wheels almost 800 on the motor
http://youtu.be/rWZ2GuIBt2s
93 octane 23.5 psi 2.8 litre ....720+ hp on the wheels almost 800 on the motor
http://youtu.be/rWZ2GuIBt2s
Last edited by WeaponX; 01-18-2013 at 09:26 PM.