Thanks Kaama!!!
07-11-2002 | 02:28 PM
#1
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Thanks Kaama!!!
Thanks Mark,
for running out to your shop to get the Cherry picker the other night....got the motor out last night and am about to crack the beast open tonight!!! stop buy if you like!!!!
Don
for running out to your shop to get the Cherry picker the other night....got the motor out last night and am about to crack the beast open tonight!!! stop buy if you like!!!!
Don
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
07-11-2002 | 06:21 PM
#3
Registered
Joined: Oct 2000
Posts: 4,541
Likes: 107
From: Western Michigan
No problemo Mr. Dynomometer 
Well, my boat is just about done. Stellings extension boxes are bolted to the transom. New gimble bearings will be here on Monday. Engine mounts have been fitted, cut and installed. Engine hatch lift, new bilge pumps, oil coolers and some wiring need to be completed yet then engines will be ready to install. Engines are being moved 10 inches back---definately more engine pit room! Also, better center of gravity/angle of attack so I've been told----we'll see.
Well, my boat is just about done. Stellings extension boxes are bolted to the transom. New gimble bearings will be here on Monday. Engine mounts have been fitted, cut and installed. Engine hatch lift, new bilge pumps, oil coolers and some wiring need to be completed yet then engines will be ready to install. Engines are being moved 10 inches back---definately more engine pit room! Also, better center of gravity/angle of attack so I've been told----we'll see.
07-11-2002 | 07:23 PM
#4
Gone Fishin'
Joined: Nov 2000
Posts: 7,408
Likes: 0
From: Grand Rapids/Holland/Grand Haven
Sweet Mark!! Let us know when you are gonna do your shakedown run. Love to help out/play chase boat if possible.
Dyno, I feel for you man. Been there (recently), done that (also, recently!!!), stole the t-shirt (and got it really dirty
)
Dyno, I feel for you man. Been there (recently), done that (also, recently!!!), stole the t-shirt (and got it really dirty
)
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
07-11-2002 | 09:20 PM
#5
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
yea Dan I washed out a set of bearings...looks like the water was coming from the front two intake bolts we thought they were blind holes.....not.... and didnt use any thread sealant......bad thought!!!!
well back to the drawing board!
well back to the drawing board!
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
07-11-2002 | 10:13 PM
#6
Registered
Joined: Oct 2000
Posts: 4,541
Likes: 107
From: Western Michigan
Dyno, I was going to stop over but forgot. Are you going to be there tomorrow night? Have a lot of work to do lately. There's ALWAYS going to be bugs to kill.
So, did you hurt anything besides having the "washed out" bearings? Do you need to "turn" the crank? Hope you saved it in time bud.
So, did you hurt anything besides having the "washed out" bearings? Do you need to "turn" the crank? Hope you saved it in time bud.
07-11-2002 | 10:27 PM
#7
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
looks like its just the bearings Mark....do you have a torque wrench I can borrow? Dave is up in Luddington...Crank looks acceptable ....one liitle scratch I can bearly hook my finger nail in.
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
