De-Tuning 850's???
#21
Registered
#22
Registered
#23
VIP Member
VIP Member
Thread Starter
Couple more question. Other than the obvious HP,what is the differences between 850's and 1075's? Both solid lifter,twin screw.Are the super chargers larger?Are they the same cubic inch? Maintainance wise,is there any difference between the two.
Searched Merc's site,but not much info on the 1075 now that it's discontinued. Thanks for all the info all ready,got some informative P M's as well. Jeff
Searched Merc's site,but not much info on the 1075 now that it's discontinued. Thanks for all the info all ready,got some informative P M's as well. Jeff
#24
Registered
Join Date: Sep 2006
Location: Richmond - Ophelia, Va
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Couple more question. Other than the obvious HP,what is the differences between 850's and 1075's? Both solid lifter,twin screw.Are the super chargers larger?Are they the same cubic inch? Maintainance wise,is there any difference between the two.
Searched Merc's site,but not much info on the 1075 now that it's discontinued. Thanks for all the info all ready,got some informative P M's as well. Jeff
Searched Merc's site,but not much info on the 1075 now that it's discontinued. Thanks for all the info all ready,got some informative P M's as well. Jeff
#25
Registered
The only differences in the 2 are the camshaft (1075 is larger), blower pulleys (1075's are smaller for more boost), and the program in the ecm. The 850 has a little longer top end interval.
Eddie
Eddie
#26
Couple more question. Other than the obvious HP,what is the differences between 850's and 1075's? Both solid lifter,twin screw.Are the super chargers larger?Are they the same cubic inch? Maintainance wise,is there any difference between the two.
Searched Merc's site,but not much info on the 1075 now that it's discontinued. Thanks for all the info all ready,got some informative P M's as well. Jeff
Searched Merc's site,but not much info on the 1075 now that it's discontinued. Thanks for all the info all ready,got some informative P M's as well. Jeff
You might want to talk to Mark at Precesion Marine. I think he has some solid lifters that they are gettin 200+ hrs out of. This would make the 1075's even more attractive.