Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Characteristics of a rough water boat? (https://www.offshoreonly.com/forums/general-boating-discussion/287111-characteristics-rough-water-boat.html)

Racerngr1 10-31-2012 11:54 PM

What kind of boat is that?

Racerngr1 10-31-2012 11:55 PM

If you knew that you were going to be using your next new boat purchase in a little rougher conditions and/or drive it a little harder than a typical owner would, could you request extra bulkheads be added to the boat or is that something that has to be done through the mold?

Dkahnjob 11-01-2012 12:02 AM


Originally Posted by Racerngr1 (Post 3806946)
Fountain has one quite a few offshore races but nobody is talking about them as a "rough water boat" even though they do quite a bit over seas where it's pretty rough on a regular basis

Hi James,
I would vote for a 42' Fountain. Mater of fact I think that is what my next boat will be. But that is a couple of years off still.
Dave

Full Force 11-01-2012 05:14 AM


Originally Posted by Racerngr1 (Post 3806952)
What kind of boat is that?

41 Apache....

Full Force 11-01-2012 05:19 AM


Originally Posted by Racerngr1 (Post 3806946)
Fountain has one quite a few offshore races but nobody is talking about them as a "rough water boat" even though they do quite a bit over seas where it's pretty rough on a regular basis

I have no idea on ocean water how a Fountain rides, but onLake Erie I personally was not impressed with the ride quality, Fountasin does not have the sharp 24 degree that all the rough water boats have and the weight and steps hurt, just like any other stepped boat in my opinion..There is question Fountains are faster in general, but we are talking rough water ride quality

I mean, a Baja, IMP, Stinger, Pachangas and such will all go through it without killing you, but in my opinion not getting beat to hell inside the boat counts, there is just no way you can beat weight and bulkheads for rough water capability, like "no replacement for displacement" saying...

I also know great lakes rough water and ocean rough water are completely different abuse factors... I can run much harder in big water when the lake has more of a roller type of waves over the short sloppy ones... it makes a HUGE difference

Full Force 11-01-2012 05:35 AM

best late model rough water capable I been on....

http://www.offshoreonly.com/classifi...o47351-en.html

Nauti Kitty 11-01-2012 05:37 AM


Originally Posted by THEJOKER (Post 3806920)
Look at the particular model and see if it races in offshore, Then count the checkered flags.

Fountain has the most flags over the past 15 years You sayin Fountain hands down?

NK

boatnt 11-01-2012 06:59 AM


Originally Posted by Nauti Kitty (Post 3806992)
Fountain has the most flags over the past 15 years You sayin Fountain hands down?

NK

well why is it that Fountain has the most flags????must be a reason

boatnt 11-01-2012 07:04 AM

All I can say is I have been going to KW for a looooong time and if they took the step bottom boats out of the races you would not have any races,,I know steps = speed but its pretty rough out there and they run the boats hard,are they all wrong for not running straight V hulls?

Knot 4 Me 11-01-2012 07:22 AM


Originally Posted by delsol (Post 3806634)
the fiberglass surrounding the Plexus might give way -- but when a hull and deck are bonded together with glass there is a much larger area than with just the Plexus -- so it is usually a stronger joint and less prone to seperation.

Agree. If I ran in big water all the time I would want a boat with a bonded deck and hull.


All times are GMT -5. The time now is 02:57 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.