Somewhat of a 800SC "clone" or whatnot. 572 cu in, but same blower you are referring to, B&M420. These were taken years ago, I bought the engines disassembled. I can scan the brochure tomorrow if needed.

Thanks but I usually just cruise with the group..
Only time I really hammer it is when I am all alone out there..

if you dont mind that would be great.
Suprising they use the smaller width belt.
My current 256 uses the wide belt which is freakin expensive..
https://sphotos-b.xx.fbcdn.net/hphot...87826753_n.jpg

thanks!

When do you hope to be testing?

Yeah, I'm not real sure either. That pic is actually from the previous owner. This is not an original "MERC" 800SC. I may go with a wider belt, the old setup with 250s had wide belts.

i wonder if the overhead crane can support the weight of a bbc?

800SC's with KE Exhaust
http://www.offshoreonly.com/classifi...o43527-en.html

Ha, it was close, but we managed. Nothing like having overkill for what you need, or a Heavy Fab shop with overhead cranes.

scroll down
http://www.bullockmarine.com/boat_li...998/index.html