![]() |
Originally Posted by WildThing47
(Post 3830070)
Bob Bull's MTI that ran 180 at the shoot out has these...
|
This si a bit of a Hijack but ask Dustin about the 1700s they are putting in a 44 OL. They made 1700 on 93 and I have heard they will make 2k on race fuel. They were built by goodwin competition in Omro WI. They thing that sux is Merc wont sell the M8s unless you get the motors too. So this boat will get 6's. Also my understanding is these motors will be tuned down before they go in the boat. After all this is just a pleasure boat.
|
Pete, you know what I'm saying....I'm saying joe schmoe isn't going to go out and buy a set of 1700s...the guy who runs that boat isn't going to be running it 160mph...It's just over built. The valve train in that motor is extremely impressive, not to mention everything else on the motor including the fact it's running MERC Ecu's reprogrammed so it interfaces with the smart craft. Now that's cool.All Aluminum, hemi style heads...she can breathe :)
Adam ;) |
Originally Posted by 302Sport
(Post 3830077)
I seem to recall a late night conversation at Ricks in KW about this, but my recollection of that convo is not too great LOL
|
Originally Posted by 454captiva
(Post 3830118)
So was Bull's 48 MTI running the higher power at the shootout? Or was he then at 1350? Clarification Please.
|
Originally Posted by WildThing47
(Post 3830090)
Pete, you know what I'm saying....I'm saying joe schmoe isn't going to go out and buy a set of 1700s...the guy who runs that boat isn't going to be running it 160mph...It's just over built. The valve train in that motor is extremely impressive, not to mention everything else on the motor including the fact it's running MERC Ecu's reprogrammed so it interfaces with the smart craft. Now that's cool.All Aluminum, hemi style heads...she can breathe :)
Adam ;) |
Originally Posted by stirling
(Post 3830167)
Do you know where I can find a pic from the cilinder head /combustion chamber ? You mentioned a Hemi style head ,curious were you based that on ?
|
Originally Posted by Lexanlarry
(Post 3829766)
I believe there would be several companys out there that will hold , most shafts will, bpm, trimax, arneson, Flexi, levi, scs,pulse, Xpower,tOp system to name a few, there are already some boats on the race circuit running them.
|
Originally Posted by 454captiva
(Post 3830118)
So was Bull's 48 MTI running the higher power at the shootout? Or was he then at 1350? Clarification Please.
|
Originally Posted by Plowtownmissile
(Post 3830381)
Do you seriously think a pair of stock 1350's pushed his huge 48' cat to 180+mph in a 1 mile drag race while it took a pair of 1800's to push a much smaller 33' cat to 190+mph in the same distance? I can't believe anyone actually ever believed he had stock 1350's at the shootout when he ran that number :lolhit:
I did. But I'm not much of a liar bull****ter. I don't really get the whole secretive nature of these guys. I'll tell you what I have, how it's set up and what it will actually run any time you ask. What's the point? There is no trophy, record book, or prize money. "Hello, I'm blah blah. I've had my 1350s turned up. There are very few in the country. I hope it will run 180. We've had it to 170+. We are going to push it to the limit today." To me, that's a lot cooler than lying about it |
| All times are GMT -5. The time now is 04:59 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.