![]() |
They work great, but will destroy your drives.... Just sayin, too much torque and power even if you drive them easy. When you get up to the higher RPM's the the HP and Torque come together, somethings going to give.
|
Running about 900hp with a pro charger through a bravo 1 xr. 2 years and 90 hrs later with 0 problems so far. That is with a five blade prop also.
|
Originally Posted by Reggie
(Post 3841430)
They work great, but will destroy your drives.... Just sayin, too much torque and power even if you drive them easy. When you get up to the higher RPM's the the HP and Torque come together, somethings going to give.
|
Originally Posted by CAB
(Post 3841443)
Running about 900hp with a pro charger through a bravo 1 xr. 2 years and 90 hrs later with 0 problems so far. That is with a five blade prop also.
|
Originally Posted by launchpad475
(Post 3841277)
502/Vortec with TONS of power to get on plane. Gets on plane with less than 2000 rpm with 5 blade.
Bravo drive gets treated very gently. Thanks |
Keep your drives and buy 1 or 2 matching spares. When they break swap out the spare and have the broken one rebuilt, then repeat, and repeat, and repeat some more!
Or upgrade drives to (theres no perfect drive, especially for a low price) Arneson and SCX offer the best Bang for the buck IMO The SCX-4 prob will end up costing as much or more then the Arneson with no gain in your application by the time you add a extension box, hydraulic steering, Stainless Gimbal ring, Helmet, Wilson Custom Marine blueprinted lower etc etc B-Max is just as much as the SCX but still uses bravo lower gears. Johns customer service is great though. X-Power seems to have a great product but at 35k each |
Originally Posted by outlawfun
(Post 3841269)
What kind of base motor do you have and did you beef it up. I've read that the stock 502 is more than able to handle the power.
Reggie lay off the pipe :bong::bong: |
What seems to be the week link, the upper or lower unit?
|
Upper xr gears , merc had a major issue with them that they decided to do nothing about . You either got a good one or a bad one . If you got a bad one you got to try again for a fee of corse.
|
Originally Posted by outlawfun
(Post 3841271)
I was interested in the vortech charger but couldn't find anyone who sells them anymore for the 502mpi setup with the ecu program. Vortech doesn't even list it on their site.
Any info would be great, I live in New Hampshire and wouldn't mind going to far for one. |
| All times are GMT -5. The time now is 07:19 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.