Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   So, it's 80*, not a cloud in the sky, vero % humidity.... (https://www.offshoreonly.com/forums/general-boating-discussion/290697-so-its-80%2A-not-cloud-sky-vero-%25-humidity.html)

Twin O/B Sonic 01-30-2013 11:22 AM

Is the interior....
 

Originally Posted by JUPITER PULSARE (Post 3858269)
Hey Gary, the Ocean Outboard Race boat with twin 2.4 bridgeports ran 78-82 mph (same AME 4000 layup and setup as my boat). My boat with twin 2.5L 260's/20" Offshore mids/Sportmaster gearcases ran mid 80's + and with stock 2.4L 200's ran 72+ (which is what I'm duplicating right now). I'm hoping to build a couple strong 2.5L fishing motors and get the boat into the upper 70's as time and money allows. For comparison, Wildmans brand new twin outboard Convincor ran 70+ with stock Merc 3.0 L 225's....Sof far my boat has ran 68MPH GPS turning HUGE 15" diameter 4 blade Suzuki 24 pitch props with 0 slip. I bought a set of Merc DAH worked Chopper 26's which I'll run this weekend. I'm sure I'll break the 70 MPH mark with these props. If anyone can make a pair of JohnnyRudes run, your the man. I'm sure you'll get her back together quickly and then we'll have to hook up and do some twin engine egg beating sport boat runs!!!

back in the bow of your boat or is the cabin still empty?

JUPITER PULSARE 01-30-2013 02:38 PM


Originally Posted by Twin O/B Sonic (Post 3858315)
back in the bow of your boat or is the cabin still empty?

Cabin is still empty. There's maybe 200-300 lbs of material total between the V-birth pads, facing settees, and galley. The galley and bulkheads are made from lightweight teak and the settees are hollow molds covered in foam and cloth. I could actually use a bit of weight in the nose!!! lol

1989mach1 01-30-2013 09:42 PM

here is some of my pics i got that im dealing with
[IMG]http://i1149.photobucket.com/albums/...ps357058e9.jpg[/IMG][IMG]http://i1149.photobucket.com/albums/...ps91710430.jpg[/IMG][IMG]http://i1149.photobucket.com/albums/...psf9bd6b45.jpg[/IMG][IMG]http://i1149.photobucket.com/albums/...ps535aaf55.jpg[/IMG]

1989mach1 01-30-2013 09:49 PM

now have to brake both the drive and motor completely down to see how bad it really is and how much its going to cost me. only had the boat for one season

JUPITER PULSARE 01-31-2013 08:11 AM


Originally Posted by 1989mach1 (Post 3858753)
now have to brake both the drive and motor completely down to see how bad it really is and how much its going to cost me. only had the boat for one season

OUCH! That's gonna leave a mark..or two..or three!

Ernest T Bass 01-31-2013 12:08 PM

Break Out Another Thousand... or three... Damn that sucks!

1989mach1 01-31-2013 04:05 PM


Originally Posted by Ernest T Bass (Post 3859019)
Break Out Another Thousand... or three... Damn that sucks!

with the top end on the outher motor to i was told at the top end of what it could cost it was..... wate for it.... 15,600 :eekdrop:

1989mach1 01-31-2013 04:17 PM

just got some good news. gears and lower drive houseing looks good just a shaft.. thats going so save some $$$[IMG]http://i1149.photobucket.com/albums/...ps218d2c0f.jpg[/IMG][IMG]http://i1149.photobucket.com/albums/...psf0f5428b.jpg[/IMG]

1989mach1 01-31-2013 04:18 PM

and thay might have a good slightly used one there :bunnydance:

Twin O/B Sonic 01-31-2013 07:25 PM

Is that the...
 

Originally Posted by 1989mach1 (Post 3858748)

top of a roller lifter ??


All times are GMT -5. The time now is 04:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.