42' Chief's First Sea Trial Video
03-29-2013 | 03:34 PM
#22
Registered
Joined: May 2009
Posts: 1,183
Likes: 6
From: Wenham, Ma
At least they still have it. Gopro should use offshore race boats as their product proving ground. Anything over 80 all bets are off nevermind rough water. I'm sure thoseguys tightened the crap out of that screw. I do.
03-29-2013 | 08:38 PM
#23
Registered
Joined: Jan 2013
Posts: 72
Likes: 0
From: South Amboy, NJ
with go pro, it helps to 'flip' the camera so it shoots upside down
and then hang it
in-stead of having the last clamp under the lense
also,...
go pro mounts n clamps are not good
the only piece you NEED is the adapter for 1/4 inch threads,
then you get real stuff at a camera pro shop
for mounting and suction cupping and clamping
and then hang it
in-stead of having the last clamp under the lense
also,...
go pro mounts n clamps are not good
the only piece you NEED is the adapter for 1/4 inch threads,
then you get real stuff at a camera pro shop
for mounting and suction cupping and clamping
03-29-2013 | 09:44 PM
#24
Registered
Joined: May 2009
Posts: 1,183
Likes: 6
From: Wenham, Ma
with go pro, it helps to 'flip' the camera so it shoots upside down
and then hang it
in-stead of having the last clamp under the lense
also,...
go pro mounts n clamps are not good
the only piece you NEED is the adapter for 1/4 inch threads,
then you get real stuff at a camera pro shop
for mounting and suction cupping and clamping
and then hang it
in-stead of having the last clamp under the lense
also,...
go pro mounts n clamps are not good
the only piece you NEED is the adapter for 1/4 inch threads,
then you get real stuff at a camera pro shop
for mounting and suction cupping and clamping
