I need a Lee intercooler or just the core ! BAD !
#11
Registered
Thread Starter
Hi Nick , I can wait .motors aren't in yet . What shape are they in ? Are they good ? I don't want to take any chances . How did you get them ? Are they from your cat ? Thanks ,JOE
#12
Registered
iTrader: (1)
Hi Boot, on my boat the water inlet hose is tapped into the crossover, this is were I installed the pressure relief valves. This way the intercoolers do not have any flow until the block pressure rises.(at about 2500-300rpm`s)
Man, what a difference now I can idle at no wake speed all day and I have not changed plugs since May, when this was done.
I bought the valves from PFM Superchillers but all they actually are is a 1/2"pipe Watts pressure valve.
Good luck, Kurt.
Man, what a difference now I can idle at no wake speed all day and I have not changed plugs since May, when this was done.
I bought the valves from PFM Superchillers but all they actually are is a 1/2"pipe Watts pressure valve.
Good luck, Kurt.
Thread
Thread Starter
Forum
Replies
Last Post
Waterfoul
General Boating Discussion
15
04-21-2005 07:47 PM