|
What muffs do you use for flushing/winterizing???
Lots of different ones, what works best??
Have Bravo drives. |
I have 3 different sets Keith...you can have all of them. I have a fresh water flush on mine.
|
Originally Posted by Drock78
(Post 3996261)
I have 3 different sets Keith...you can have all of them. I have a fresh water flush on mine.
|
1 Attachment(s)
Originally Posted by Pwraddr
(Post 3996208)
Lots of different ones, what works best??
Have Bravo drives. I use this one seemed to hold better than the cheap circle one. [ATTACH=CONFIG]508029[/ATTACH] Then I put tape on my nose cone pick- up |
1 Attachment(s)
I have a set of these, and they are great.
http://www.marinepowerservice.com/Bo...ctID/43282.cfm [ATTACH=CONFIG]508044[/ATTACH] |
Originally Posted by RT930turbo
(Post 3996452)
I have a set of these, and they are great.
http://www.marinepowerservice.com/Bo...ctID/43282.cfm [ATTACH=CONFIG]508044[/ATTACH] |
Originally Posted by RT930turbo
(Post 3996452)
I have a set of these, and they are great.
http://www.marinepowerservice.com/Bo...ctID/43282.cfm [ATTACH=CONFIG]508044[/ATTACH] |
Thanks guys!
|
Question, do you need to tape off sea strainer pick ups when winterizing?
|
Originally Posted by Dave M
(Post 3996528)
X3, you don't have to worry about them falling off. However, I have a sea strainer and flush through it.
Thanks! |
| All times are GMT -5. The time now is 02:29 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.