Couple of butterfly band aids and set off to sea!

5200 to the rescue!!!!

:party-smiley-004:


[ATTACH=CONFIG]508301[/ATTACH]

[ATTACH=CONFIG]508305[/ATTACH][ATTACH=CONFIG]508304[/ATTACH]

This may work.................

its missing the engines the addy reads but if you follow his other items http://www.ebay.com/itm/572-Mercruis...s_Gear&vxp=mtr

Loose the part that was cut , Add a new transom and throw a couple of outboards on it . Problem solved ! You'll have a 30' outboard Hustler

Looking at the pics again, you could jack up the back end a couple inches; fill in the bottom with some JB Waterweld, and you'd have a one of a kind 40 Hustler step-bottom. :drink:

correct, that boat was recovered with engines still mounted and were all 3 started and videoed before the 1st auction.

Our old "top Cat" Spectre was stolen and cut the same way

All that and all they took was the motors and drives? I see a lot of decent rigging items there