Page 27 says it has an NMEA 0183 output

anybody have luck Replacing the battery in a Livorsi set up. I tried soldering one in and It still doesn't pick up.Kinda hard to get a hold of Livorsy but the said I have to buy a new one.. seems a waste but that's what they said

Thats the reason I hooked mine to the Lowrance,

How do you wire it up? Just picked up a elite 4 and was trying to figure out where to hook up at?

I have asked a similar question some time ago (didn't get any comments back :( ) Can I use the Garrfieg Speedo GPS antenna on a Garmin GPS/chart plotter? or the Garmin antenna (internal) on the GPS or on the vessel view?

My unit says it has the nmea 0183 output but only two plugs on the back for transducer hook up and one for separate speed temp sensor.

I have the HDS7 and wired the Lorvisi GPS Gauge to the NMEA183. I'll see if I can find the instructions.

Yes, You can connect your GPS speedo to your Garmin GPS w/internal antenna. If I recall, the blue wire coming off the GPS harness connects to the signal wire of the speedo.

[ATTACH=CONFIG]520043[/ATTACH]

Has anyone ever hooked their Lorvisi GPS to a Garmin 3206? If so, how did you do it?