Still not sold on clip ons?
12-28-2013, 09:04 AM
#51
Gold Member
Yeah if you're comparing to your 22' Donzi....., I'll play ; )
My motors are naturally aspirated and making approx. 1.5 HP's per cu. in.
How's your 502 doing?? BTW, that equates to 750 HP's for your motor.
Again, naturally aspirated.
And mine runs pretty fair at speeds over 20, in chop over a foot too
My motors are naturally aspirated and making approx. 1.5 HP's per cu. in.
How's your 502 doing?? BTW, that equates to 750 HP's for your motor.
Again, naturally aspirated.
And mine runs pretty fair at speeds over 20, in chop over a foot too
12-28-2013, 10:17 AM
#52
Platinum Member
Platinum Member
02-21-2014, 08:36 PM
#54
Platinum Member
Platinum Member
Came from the factory on these motors. (F-1 V-8)
BTW, w/the recent talk of top end passes, this boat went 141 on radar in the '80's. Pre GPS.
No juice.
He was an STV dealer in Ohio and where I bought my River Rocket.
That boat was evil. I rode in it a couple times.
BTW, w/the recent talk of top end passes, this boat went 141 on radar in the '80's. Pre GPS.
No juice.
He was an STV dealer in Ohio and where I bought my River Rocket.
That boat was evil. I rode in it a couple times.
When Jim ran it down the Lake, it made an unbelievable howling sound that you'd never forget
I'm sure that a lot of this had a definite effect on me leaning heavily toward outboard power on the last 8 boats that I've owned
Last edited by davidmercury; 02-21-2014 at 09:14 PM.
