|
Originally Posted by brian41
(Post 4042786)
He was here when I posted this and I hate crickets.
First off I was under the impression these were the engines out of his boat...NOT, they were dusty old used up short blocks Your turn. Have man cave customers, If needed I will continue in the morning. |
|
Good point I would also like to know what the difference is! Mind you I'm not an engine "professional" so I get confused easily,
|
Originally Posted by Pwraddr
(Post 4042836)
Thread was a waste....OP had all the answers already, didn't want opinions because if he did he wouldn't have countered on them by saying he could have done it, built 50 engines, rewards bad behavior, etc.
Seems like someone just needed a hug. Glad he got his stuff. |
Originally Posted by SABER28
(Post 4042889)
yes ive built plenty of engines from my perkins in my cat. hilo to my 454 in my 454 ss truck. I chose to send them to the builder because I wanted a professionals opinions on cams and heads etc.
|
Originally Posted by SABER28
(Post 4042889)
yes ive built plenty of engines from my perkins in my cat. hilo to my 454 in my 454 ss truck. I chose to send them to the builder because I wanted a professionals opinions on cams and heads etc.
im a big boy and pretty much make up my own mind what a job is worth 135 posts on this now . and its gonna be he said this and that == gonna be 3 stories yours his and the truth give it up .gonna be no winners here . merry xmas |
Originally Posted by smokin' gun
(Post 4042898)
i can tell you 1 thing ,i would never have brought this here over $400 .asking would you pay???...
im a big boy and pretty much make up my own mind what a job is worth 135 posts on this now . and its gonna be he said this and that == gonna be 3 stories yours his and the truth give it up .gonna be no winners here . merry xmas Seriously, 400 dollars....has to be the cheapest boating day ever. Can't even cover fuel with that. |
Originally Posted by smokin' gun
(Post 4042898)
i can tell you 1 thing ,i would never have brought this here over $400 .asking would you pay???...
im a big boy and pretty much make up my own mind what a job is worth 135 posts on this now . and its gonna be he said this and that == gonna be 3 stories yours his and the truth give it up .gonna be no winners here . merry xmas no , there isn't really three sides or even two sides, i said exactly what happened. its really not that complicated he was supposed to take down and measure my motors and three and a half months later it still wasn't done. end of story. |
Originally Posted by Wobble
(Post 4042897)
Scott, you have all the opinions you need. You can delete this thread or maybe have it locked. It's winter and the BS is only going to get deeper.
just gonna get ugly from here on .end it now before the new year starts |
Who is the builder dammit!! Why are we *****footing around this :cartman:
|
| All times are GMT -5. The time now is 11:23 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.