above water engine idle clips!
#82
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
#83
Registered

Joined: Sep 2006
Posts: 1,167
Likes: 59
From: toledo ohio
#84
Registered
Joined: Jan 2014
Posts: 16
Likes: 0
From: Los Angeles, CA
#85
Registered
Joined: Oct 2005
Posts: 102
Likes: 0
Yeah it's mine. Took me about 2 years to build, but I designed everything in it from every grab handle to the engine hatches to the lighting, to the exhaust tips, and hydraulic hatch lifts and about 1000 other items. The motors are 602 ci psi blower motors with relatively low boost, only 7.5 lbs and they make 1285 hp each. They run on motec management systems with data acquisition. I've had the boat just over 180mph on the low boost setting. If I turn the boost up it makes 1620 hp on the dyno but I've never run that in the boat. The boat has X Power outdrives on it. Actually that is the company I own, and I built the boat to display the drives. Like everybody on offshore I love boating with a passion so I can't wait for summer to arrive so we all hang out for some fun..
#86
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
Nothing too spectacular... But probably one of the better 496 mag (non-HO) idles....... Has a Whipple Stage II flash which changed the timing and fuel curve, which made it sound a lot better at idle (of course it performs better as well)
http://youtu.be/VZWLZkTa_m0
http://youtu.be/VZWLZkTa_m0
#88
Last edited by WeaponX; 02-05-2014 at 10:57 PM.
#90
Registered

Joined: Jun 2010
Posts: 1,395
Likes: 930
From: LBC, OH




