What's out there for $30k??
03-12-2014 | 05:50 PM
#31
Thread Starter
Registered
Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
https://dallas.craigslist.org/ndf/boa/4362161038.html This is alot of boat for the money great rough water boat with copious amounts of power and a wallet full of gas cards.
RG.
RG.
03-12-2014 | 05:50 PM
#32
Thread Starter
Registered
Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
i was climbing all over that boat last weekend checking it out with a buddy from buffalo. my buddy is gonna miss out by flipping the coin too many times between the saber and a pantera. chris's boat isnt gonna last. i was super impressed by the quality of the saber. ran with the boat a bunch of times but never took a indepth look at it til last weekend. dont sleep too long!
03-12-2014 | 06:08 PM
#33
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
Sorry for no pics....
I have an 89 357 SR-1 that I would part with for 30k.
Two brand new 540cuin Merlin's with B&M 250's, dual 850's on each dialed in by Nickerson (tags still there) that dynoed 648 and 653 running through Borg 72c gold tags......
Oversized oil cooler
Oversized trans cooler
Steering cooler
Full hydraulic internal steering......external tie bar.....needs external for obvious reasons.
Ac, microwave, no genny. Every wire replaced, all lighting led.
Deleted the head....wasted space. Buck-it and dump-it.....or....hold-it.
Tri-axle trailer that needs help.
Bottom blue printed to fix a port hop (chine)
All livorsi carbon fiber monster with mega rim including gps speedo.
New port transom assy for trs
Both trs drive as better than new
4 blade solid hub choppers
Ditched the old crap and bought a fastec cockpit....McLeod elec bolsters......rear seat.....head rest.....
Fastec style cabin door.....slides to port....not the hinges and struggles with the original design.
All white hatches.
In 2000, separated the hull from deck, shaved everything except the forward cleat and chocks, rebonded and put and all white taco rub rail.
No grommets, snaps or otherwise except on the windscreen frame.
KVH compass.
11" standard horizon gps with rear facing camera.
Shore power.
Motors have less than 5 hrs each.....still fabbing custom **** and detailing, so no run time since dyno.
I need to install motors and drives.....if buyer is willing to gamble.....I need 30 days from commencement to complete. If not, I will sell to same for a 10k reduction. How's that?!?!?!?!
I have an 89 357 SR-1 that I would part with for 30k.
Two brand new 540cuin Merlin's with B&M 250's, dual 850's on each dialed in by Nickerson (tags still there) that dynoed 648 and 653 running through Borg 72c gold tags......
Oversized oil cooler
Oversized trans cooler
Steering cooler
Full hydraulic internal steering......external tie bar.....needs external for obvious reasons.
Ac, microwave, no genny. Every wire replaced, all lighting led.
Deleted the head....wasted space. Buck-it and dump-it.....or....hold-it.
Tri-axle trailer that needs help.
Bottom blue printed to fix a port hop (chine)
All livorsi carbon fiber monster with mega rim including gps speedo.
New port transom assy for trs
Both trs drive as better than new
4 blade solid hub choppers
Ditched the old crap and bought a fastec cockpit....McLeod elec bolsters......rear seat.....head rest.....
Fastec style cabin door.....slides to port....not the hinges and struggles with the original design.
All white hatches.
In 2000, separated the hull from deck, shaved everything except the forward cleat and chocks, rebonded and put and all white taco rub rail.
No grommets, snaps or otherwise except on the windscreen frame.
KVH compass.
11" standard horizon gps with rear facing camera.
Shore power.
Motors have less than 5 hrs each.....still fabbing custom **** and detailing, so no run time since dyno.
I need to install motors and drives.....if buyer is willing to gamble.....I need 30 days from commencement to complete. If not, I will sell to same for a 10k reduction. How's that?!?!?!?!
03-12-2014 | 06:19 PM
#34
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
Oh.....
And new 33c cables
6 blue top optimas
Full stereo with (google it) 3 XES 2 channel amps (XES- M1)
All white boat. Purple and silver metallic accents. All interior has 0 hours in the sun.
Motors purple and silver.
Drives purple, lowers silver, props polished stainless.....there are pics here somewhere......
And new 33c cables
6 blue top optimas
Full stereo with (google it) 3 XES 2 channel amps (XES- M1)
All white boat. Purple and silver metallic accents. All interior has 0 hours in the sun.
Motors purple and silver.
Drives purple, lowers silver, props polished stainless.....there are pics here somewhere......
03-12-2014 | 06:20 PM
#35
Registered
Joined: Feb 2012
Posts: 643
Likes: 7
From: Chesapeake Bay
http://baltimore.craigslist.org/boa/4364394301.html
Not mine don't know it, and it is much older. But seems like it has some upgrades and surface drives are always cool. And I bet you could get it for 15, however being an 85 the cabin probably looks like Reggie's clubbed out basement in his hayday
Good luck in your search.
Not mine don't know it, and it is much older. But seems like it has some upgrades and surface drives are always cool. And I bet you could get it for 15, however being an 85 the cabin probably looks like Reggie's clubbed out basement in his hayday
Good luck in your search.
03-12-2014 | 06:41 PM
#39
Registered
Joined: Jul 2007
Posts: 340
Likes: 35
03-12-2014 | 06:46 PM
#40
Thread Starter
Registered
Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
This might be to far for ya.
http://www.powerboatlistings.com/view/26759
http://www.powerboatlistings.com/view/26759
Ryan... I know you're lurking... where are you
