XSpower HEADERS
03-23-2015 | 09:13 AM
#81
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
can you load up some bigger pics? These would not expand to larger view. Are they still doing marine? i could not find a link on their site thanks
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 03-23-2015 at 09:17 AM.
03-23-2015 | 09:36 AM
#83
Registered
Joined: Apr 2005
Posts: 107
Likes: 3
From: Michigan
http://xs-power.com/other-specialty-marine.htm
Last edited by spazz; 03-23-2015 at 02:35 PM. Reason: spelling
03-23-2015 | 12:09 PM
#85
Registered
Joined: Oct 2006
Posts: 1,109
Likes: 11
From: Baltimore, MD
i have emailed them quite a few times and have always gotten a response. I bought a y pipe for my tundra.for a 1/3 of what everyone else charged. it did not come with an o2 sensor bung. however I called the guy and he said send it back and I will take care of it for you. next to the picture it did say o2 sensor not included race purpose only.
I cut the old one out of my pipe and welded it on, all and all very happy with XS power. for there prices you cannot beat them.
I cut the old one out of my pipe and welded it on, all and all very happy with XS power. for there prices you cannot beat them.
08-27-2015 | 09:04 AM
#86
Registered
Joined: Nov 2004
Posts: 14,090
Likes: 3,679
From: On A Dirt Floor
I'll update since he didn't. Yet,
They leaked after 5 hrs.
See: http://www.offshoreonly.com/forums/g...a-headers.html
They leaked after 5 hrs.
See: http://www.offshoreonly.com/forums/g...a-headers.html
09-01-2015 | 06:40 PM
#87
Registered
Joined: Sep 2015
Posts: 3
Likes: 0
Mine leaked right away, hydraulic lock and bent rods. How much does that cost? Seller said that it was not his problem and you could not get blood out of a turnip… XSpower hung up the phone when I explained the problem, tried calling back, goes straight to voice mail. During my conversation with the seller (FTG Motorsports) he stated that he had had 30% of the one’s that he had sold have the same problem, also stated that he has removed from web page, just checked, they are still for sale on his page. Don’t EVEN think about buying these headers, spread the word, don’t want anyone else to get burned.
09-01-2015 | 07:05 PM
#88
Registered
Joined: Apr 2006
Posts: 10,042
Likes: 712
From: Toledo Oh
No offense or bash intended Magnautic...just a random thought...
If your putting together a motor that is to the point you need headers over Gills or SMs, why on earth would you skimp on a known weak point like headers?
Isnt that like throwing AFR's, a big cam and a blower on a 7.4 and leaving the cast crank?
If your putting together a motor that is to the point you need headers over Gills or SMs, why on earth would you skimp on a known weak point like headers?
Isnt that like throwing AFR's, a big cam and a blower on a 7.4 and leaving the cast crank?
09-01-2015 | 10:02 PM
#89
Registered
Joined: Sep 2015
Posts: 3
Likes: 0
No offense or bash intended Magnautic...just a random thought...
If your putting together a motor that is to the point you need headers over Gills or SMs, why on earth would you skimp on a known weak point like headers?
Isnt that like throwing AFR's, a big cam and a blower on a 7.4 and leaving the cast crank?
If your putting together a motor that is to the point you need headers over Gills or SMs, why on earth would you skimp on a known weak point like headers?
Isnt that like throwing AFR's, a big cam and a blower on a 7.4 and leaving the cast crank?
