Need help! What make and model is this hull?
 

I'm looking into possibly getting this as a project boat. I've spoken to the owner and he said the only info he knows about the boat is that its a 23 or 24 footer. Was converted from inboard to outboard.

http://s92.photobucket.com/editor?im...tml?sort=3&o=3 http://i92.photobucket.com/albums/l3...ps0648795f.jpghttp://i92.photobucket.com/albums/l3...ps7524fd30.jpg

You have to host the pic on photo sharing website like photobucket, etc. for it to display

Thanks for the help

It looks like an older Warlock or Sunsation.

Yeah I looked them up looks more like a Warlock. Thank you. Are they good boats can't find much info on them?

do you have a serial number? that might help..

The hull identification number at top right side of transom will indicate manufacturer. (first 3 letters) Lot of boats similar to that design

CXN are the first 3 letters in the vin. Where can I look up the information for this?

NOT THE SAME HULL OBIOUSLY,BUT SIMILAR HULL DESIGN -21' L.O.A. CALLED A REDLINE BUT WAS A SPLASH OF SOMETHING ELSE THAT I COULD NEVER FIND. ANYONE KNOW?
LAST I KNEW THE BOAT WAS IN NEW JERSEY - ANYBODY SEEN IT?

....BUT A PROJECT I DID ...BARE STOCK 200 YAMAHA .....GOT 82 GPS IN 8-12 CHOP AND RIGHT ON THE EDGE OF CONTROL.
HAD A PAD ON THE KEEL AND NO TABS
I LOVED THAT BOAT, I'VE HAD BIGGER.... BUT THIS ONE YOU COULD GET INTO AT ANY LANDING -YOU GUYS FROM MAINE KNOW WHAT I MEAN:angry-smiley-044: WITH A 1/2 TON TRUCK .....AND IT WAS A BLAST.

http://i1156.photobucket.com/albums/...G1/NEWBOAT.jpg

Thanks Jettdogg. Was thinking of using a 225 mercury optimax nitro a buddy's giving me a great deal on it. So you recommend the hull designed? Just thought the side walls where to low for a firm dry ride? Spoke to the guy again said the title says its a Crusader Boats Inc. I can't find any info about the manufacturer. Any one here ever heard of them? I can only find info on a 36 ft trap fishing type boat.