need damaged ssm#6 low case
#1
Registered
Thread Starter
Join Date: Aug 2005
Location: lake charles, la
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
need damaged ssm#6 low case
Looking for a damage ssm#6 lower I slung a blade and cut cavitation plate off. Need a drive I can cut the plate off of and have Wilson weld on.
#3
VIP Member
VIP Member
#6
Registered
Thread Starter
Join Date: Aug 2005
Location: lake charles, la
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Blade flew about 200 feet in the air and the plate went skipping across the water and shuck the boat like it was coming apart
#7
Registered
#8
Registered
My source has been revealed. Lucky that blade did not catch the other prop and drive on the way out. I wonder if the prop shaft is bent or any other damage to the internals. I would have all of the specs checked before that drive goes back together.
#9
Registered