Transom rubber seals
#1
Transom rubber seals
I can`t seem to find a rubber material to make the transom seals with that is high temp. Ive tried a few from Grainger that say high temp but they don`t last.
The pre made ones from Teague are too small , I need a bulk material so I can make my own...
The pre made ones from Teague are too small , I need a bulk material so I can make my own...
#2
Registered
funny this is here,,I was gonna call Rik from Arneson and see if I could get some of his gasket material.I'm on the search for it too.
#5
VIP Member
iTrader: (1)
McMaster Carr has what you need. Catalog 119. pages 3464 thru 3467
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Last edited by Smitty; 07-08-2014 at 01:21 PM.
#6
Registered
iTrader: (1)
McMaster-Carr is my go to 99% of everything store. I'm one day away shipping from one depot too.
They should be on everyone's favorite list.
They should be on everyone's favorite list.
#7
Registered
#8
Grainger is local and I can usually pick up next day, silicone rubber then, I`m thinking 1/8" like this:
http://www.grainger.com/product/Rubb...Code=P2IDP2PCP
Mc Marter Carr Hart needs to do something better than them drawings for a catalog, I just can`t warm up to that.
http://www.grainger.com/product/Rubb...Code=P2IDP2PCP
Mc Marter Carr Hart needs to do something better than them drawings for a catalog, I just can`t warm up to that.
#10
Registered
iTrader: (3)
Penis, Mcmaster is local too. Right off 290 somewhere I think . Better prices than granger rape zone. Pick me up some if you go. Click on "extreme temperature silicone rubber" halfway down middle of the page. Cheaper, higher heat rating, and better tensile strength than the grainger stuff.
http://www.mcmaster.com/#standard-rubber-sheets/=sr7bb4
http://www.mcmaster.com/#standard-rubber-sheets/=sr7bb4