Offshoreonly.com
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   What happened to the quad diesel OuterLimits? (https://www.offshoreonly.com/forums/general-boating-discussion/315476-what-happened-quad-diesel-outerlimits.html)

Bostonirish 05-08-2016 04:57 PM
Any videos? Looks great sitting in the water

sutphen 30 05-08-2016 06:40 PM
Originally Posted by 7075T6 (Post 4436553)
First test in 2,5 years after some serious modifications..
105 mph(91,3 kn)..one engine not 100%..computer say injectorproblem on no 1 cyl.. still..105 in 1 m chop..runs like a train..
Will fix injector and aim for 120...
thats great,,I bet its alot better than the aluminum can you had before.:)

C5000R 05-09-2016 12:38 AM
What Hp are the engines?

7075T6 05-09-2016 12:39 PM
No video. Forgot to turn on the GoPro...

7075T6 05-09-2016 12:40 PM
Originally Posted by C5000R (Post 4436723)
What Hp are the engines?
FPT 6,7 - 560 hp

7075T6 05-09-2016 12:43 PM
Originally Posted by sutphen 30 (Post 4436626)
thats great,,I bet its alot better than the aluminum can you had before.:)
The mooring is NOT better, with crashboxes, 35" props and 0.8 overdrive...

pstorti 05-09-2016 02:20 PM
Wow what is idle speed 12-15 mph? Could you change for 1:1 transmissions and 40" props? I wonder why they went with cashboxes those motors aren't so powerful that a transmission couldn't handle them. What was the setup on the old boat? I know it had the same engines.

iliveonanisland 05-10-2016 03:53 AM
Why did you go with the fiat diesels instead of say cummins? Size? Weight. Rpm? Thx, bad mofo...rm

pstorti 05-10-2016 07:52 AM
Originally Posted by iliveonanisland (Post 4437166)
Why did you go with the fiat diesels instead of say cummins? Size? Weight. Rpm? Thx, bad mofo...rm
I believe they were already in the boat when he bought it. While they are both good engines Cummins has done a horrible job with the packaging of the engines and they are much wider than the FPT. Just lazy engineering on Cummins' part.

7075T6 05-13-2016 12:26 PM
Originally Posted by pstorti (Post 4436936)
Wow what is idle speed 12-15 mph? Could you change for 1:1 transmissions and 40" props? I wonder why they went with cashboxes those motors aren't so powerful that a transmission couldn't handle them. What was the setup on the old boat? I know it had the same engines.
Need the 11" dropboxes to get propshafts in right places. SCS crashbox/dropbox is a nice compact unit. Same setup from day one.
Idle speed not so bad when running one or two engines - 7-8 mph.


All times are GMT -5. The time now is 02:53 PM.
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.