![]() |
Damn that is a great looking boat
|
Originally Posted by pslonaker
(Post 4162831)
florida ones were builtto workboat standards. It was built like a tank
|
1 Attachment(s)
[ATTACH=CONFIG]527224[/ATTACH]
Originally Posted by Premier Perf
(Post 4163270)
What he said. They run really good in rough water but slow. If you are looking at one with twin 225's its going to be real slow. With twin 300's vrods they run like 53 more or less. Most 33's have triples on it. They have been around for a while since the early 90's but have changed hands many many times. They are popular here in Miami. Every one that lives in Hialeah has one being pulled by an H2.
|
Yup...wasn't pass mid 50's. If you have lab props high x, low fuel, crew and equipment than that's different. None the less great rough water machines
If I'm not mistaken, they are based off the old 36 Cig. They also have a wide beam. |
Thanks guys.
I've been told with some etec 225s this boat cruises 50 tops 63, 64. I guess I'll find out. Basically if I get a 50 mph cruise in something that can take a little slop and it's turn key 365 days a yr I'd be content. for a couple weeks.......haha Then I'd start saving for some vrod 350s ;) |
My friend has a 2008 with twin 275 and best I've seen is 56 with the arch open.
|
Originally Posted by Premier Perf
(Post 4163377)
Yup...wasn't pass mid 50's. If you have lab props high x, low fuel, crew and equipment than that's different. None the less great rough water machines
If I'm not mistaken, they are based off the old 36 Cig. They also have a wide beam. |
1 Attachment(s)
[ATTACH=CONFIG]527384[/ATTACH]
Originally Posted by VISION
(Post 4164845)
4 guys, 200 gallons of fuel , case of beer and a rainy day.
|
Originally Posted by VISION
(Post 4164847)
[ATTACH=CONFIG]527384[/ATTACH]
|
Would love to have a boat like that with a tops in that # range.
Nice boat and numbers |
| All times are GMT -5. The time now is 06:29 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.