Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Help!! No Sound (https://www.offshoreonly.com/forums/general-boating-discussion/317308-help-no-sound.html)

av8rdat 08-27-2014 12:32 AM

Help!! No Sound
 
Just got my 98 Donzi 28ZX... It has twin 350's with factory "silent choice" exhaust... My buddy ran it for me tonight and I was so disappointed standing on the shore in the noise level. My other boat with a single 350 and Captain's Call is louder... Does anyone know about these baffles and how to remove them?! I need more sound! Can someone please help?!

FIXX 08-27-2014 01:44 AM


Originally Posted by av8rdat (Post 4178682)
Just got my 98 Donzi 28ZX... It has twin 350's with factory "silent choice" exhaust... My buddy ran it for me tonight and I was so disappointed standing on the shore in the noise level. My other boat with a single 350 and Captain's Call is louder... Does anyone know about these baffles and how to remove them?! I need more sound! Can someone please help?!

most guys just replace the tips with a good set of slash cut ones..you have to remove the tip to cut out the center so you may as well replace them..

shepnic74 08-27-2014 08:35 AM

I cut mine out with a torch and it was a b!tch then baught flappers from imco that go inside the tip and are held in place with bushings. Made my 454s sound a lot nicer

av8rdat 08-27-2014 09:29 AM

I looked at removing the tips and found 3 studs through the transom for each tip. What is the re-sealing procedure like going back on with them?

av8rdat 09-08-2014 02:02 AM

So come to find out... I had "Silencer Tips" on the boat. Who in their right mind would pay for these? but hat is not the question. So I removed each tip, took a plasma cutter and gutted the silencer portion. (be advised, don't get in a hurry and think you need to do this friday afternoon so you can run it friday night). I did get mine all back together and we did make "last call" at our only waterside bar (oh and we had the ribs too) but the plasma cutter works well as long as the tips are off the boat. Being careful and not in a rush will keep you from bluing a couple spots like I did... The boat does sound so much better now!

SB 09-08-2014 07:53 AM

I used to be a street racer.....I've kept the mentality.

Walk softly but carry a big stick vs walk loudly and not be able to do schit.

If I could have a 100% silent exhaust with no power / speed reduction, I'd be all over it.

Obviously, I understand the noise thing......unless the vehicle making the noise is a turd. Then, it drives me nutz. LOL.

ChargeIt 09-10-2014 04:33 PM

Everybody to their own but I agree, if you don't NEED the free flow for max power; Noise = douche

Glad you are happy, just don't bring the noise police down on the rest of us.


All times are GMT -5. The time now is 06:21 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.