Nortech 340 with triple 300s vs 350s
#51
just wish I hadn't put so much money into the engines of my Fountain. Love to run it in the Shootout, but cant justify keeping it for that.
Nortech goes into the mold 10/3. So should be done some time after the first of the year. May not have it brought back until the Miami show.
Speced out with the following: triple seats at the helm, Livorsi controls and wheel, fixed rear bench, sliding away seat behind helm, triple 300s, between 2 different paint schemes but the center will be painted (blue with silver fades or black with red and gray fades), waves and wheels upgraded stereo system, underwater lighting, 8000 series Garmin, VesselView 7. I'm sure there is more but thats off the top of my head.
Nortech goes into the mold 10/3. So should be done some time after the first of the year. May not have it brought back until the Miami show.
Speced out with the following: triple seats at the helm, Livorsi controls and wheel, fixed rear bench, sliding away seat behind helm, triple 300s, between 2 different paint schemes but the center will be painted (blue with silver fades or black with red and gray fades), waves and wheels upgraded stereo system, underwater lighting, 8000 series Garmin, VesselView 7. I'm sure there is more but thats off the top of my head.
#53
Registered
Joined: Aug 2003
Posts: 2,975
Likes: 12
From: Charlotte, NC
+1 sounds like you have put some thought into your build. Hoping not to be too far behind you.
So will your boat be a Miami Boat Show feature boat? If so I might be buying my ticket now to make sure I get a ride in it.
So will your boat be a Miami Boat Show feature boat? If so I might be buying my ticket now to make sure I get a ride in it.
#54
Good luck on your build NASCAT. This has been fun so far. Others have said that I should do the keys run before bringing it back. I might have to think on that one. Boat wont be at the Miami show unless they offer some great discount but unlikely. When is the keys run? If its around the Miami show, it could be a possibility.
#55
Registered

Joined: Jul 2011
Posts: 5,175
Likes: 302
From: Clearwater, FL
Good luck on your build NASCAT. This has been fun so far. Others have said that I should do the keys run before bringing it back. I might have to think on that one. Boat wont be at the Miami show unless they offer some great discount but unlikely. When is the keys run? If its around the Miami show, it could be a possibility.
#56
Registered

Joined: Jun 2005
Posts: 11,904
Likes: 1,143
#57
Bling Bling
Joined: Nov 2003
Posts: 347
Likes: 0
From: Santa Barbara
just wish I hadn't put so much money into the engines of my Fountain. Love to run it in the Shootout, but cant justify keeping it for that.
Nortech goes into the mold 10/3. So should be done some time after the first of the year. May not have it brought back until the Miami show.
Speced out with the following: triple seats at the helm, Livorsi controls and wheel, fixed rear bench, sliding away seat behind helm, triple 300s, between 2 different paint schemes but the center will be painted (blue with silver fades or black with red and gray fades), waves and wheels upgraded stereo system, underwater lighting, 8000 series Garmin, VesselView 7. I'm sure there is more but thats off the top of my head.
Nortech goes into the mold 10/3. So should be done some time after the first of the year. May not have it brought back until the Miami show.
Speced out with the following: triple seats at the helm, Livorsi controls and wheel, fixed rear bench, sliding away seat behind helm, triple 300s, between 2 different paint schemes but the center will be painted (blue with silver fades or black with red and gray fades), waves and wheels upgraded stereo system, underwater lighting, 8000 series Garmin, VesselView 7. I'm sure there is more but thats off the top of my head.
#58
Registered
Joined: Nov 2009
Posts: 176
Likes: 0
From: Lake of the Ozarks
just wish I hadn't put so much money into the engines of my Fountain. Love to run it in the Shootout, but cant justify keeping it for that.
Nortech goes into the mold 10/3. So should be done some time after the first of the year. May not have it brought back until the Miami show.
Speced out with the following: triple seats at the helm, Livorsi controls and wheel, fixed rear bench, sliding away seat behind helm, triple 300s, between 2 different paint schemes but the center will be painted (blue with silver fades or black with red and gray fades), waves and wheels upgraded stereo system, underwater lighting, 8000 series Garmin, VesselView 7. I'm sure there is more but thats off the top of my head.
Nortech goes into the mold 10/3. So should be done some time after the first of the year. May not have it brought back until the Miami show.
Speced out with the following: triple seats at the helm, Livorsi controls and wheel, fixed rear bench, sliding away seat behind helm, triple 300s, between 2 different paint schemes but the center will be painted (blue with silver fades or black with red and gray fades), waves and wheels upgraded stereo system, underwater lighting, 8000 series Garmin, VesselView 7. I'm sure there is more but thats off the top of my head.
Nascat, I hope to earn your business soon, call me after your tour on Friday and let's get you in line. It's been a pleasure working with you so far and hope you will let me build yours as well.
#60
Registered
Joined: Mar 2002
Posts: 2,142
Likes: 3
From: Miami Beach
My Boat has a port helm and I drive 95% of the time standing in the center leaning on the bolster of the two seats, center helm is the way to go!


