tim campbell

I have a 2002 292 Fastech and would like to add this wheel but does it fit on the stock hub?

mickeymcclgn

iTrader: (1)

Isotta wheels use a 6 hole bolt pattern, Your formula should have full hydraulic steering and the helm with both a 5 and 6 bolt pattern on it. What style wheel is on your boat currently?

tim campbell

Yes my formula does have full hydraulic steering and the wheel is the stock Dino.

Thank you for your help

Tim

T-RAV

iTrader: (1)

I believe my original was a Dino and it bolted right on. It came with a hub also. Buy lots of fitz polish the get water spots bad!!!

C_Spray

iTrader: (2)

The chrome blistered and peeled on my Aria, so I switched to a powder-coated aluminum wheel. "Rapids" by Flaming River. (Also sold under other names.)

4mulafastech

Here's a pic of the Isotta Aria wheel on my 2006 292. As others have said, it is a direct swap and fit the stock hub. I got it a few years ago and so far no signs of the chrome coming off. I boat in fresh water only and occasionally use a spray wax on the chrome. Great upgrade over the stock Dino!

[ATTACH=CONFIG]529051[/ATTACH]

mickeymcclgn

iTrader: (1)

Also for what it's worth, isotta changed the material on their wheels last March from chrome plated steel to all stainless steel. So the new wheels will not corrode. Bill at diamond performance got me my new isotta last year and advised me to wait for the new model. I was glad I did. He won't steer you wrong.

tim campbell

Ok so I called bill at diamond and he says it will not fit I need to change the hub. not real sure which way to go now.

teaguecustommarine

How many holes do you have in your hub? Many of hubs have both 6 bolt patterns in them (dino and momo). I can get you a hook up on the wheel and help you out with any hub questions.

-Eric