Now this is racing!
09-12-2014, 09:43 PM
#11
VIP Member
VIP Member
That is a great video, I agree I would love to race in that division, affordable, wild, competitive....
09-12-2014, 10:12 PM
#12
Registered
Join Date: Feb 2011
Location: Brookfield Wi
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
The Honda series looked insane. If you didn't get run run over after spinning out and getting tossed out someone was trying to take your arm off in a collision. Looks like hella fun!
09-12-2014, 10:26 PM
#13
Registered
iTrader: (1)
I guess it is hard for me to swallow after the badass merc 2.5 and all the old OMC 2 strokers that would most likely bury these 4 pokes.
10-12-2014, 11:10 PM
#14
Registered
Who ever desiged those pieces of chit should be made to drag their own gallow up the hill and tie their own noose . I love the way if they don't spin out they just lay over on their side for a 100 feet until they eventually do spin or the driver gives up.
Put those motors on a nice 22-24 cat and that would be fun and about a 100 times safer than those spinning out rolling over tossing drivers and running them over slowvees.
Put those motors on a nice 22-24 cat and that would be fun and about a 100 times safer than those spinning out rolling over tossing drivers and running them over slowvees.
Last edited by tommymonza; 10-12-2014 at 11:14 PM.
10-13-2014, 01:12 PM
#19
Registered
down here the tri hull racing is what I call "stupid fun"
I built the hulls
modified glastron 166" bottom
with a single driver enclosed top deck with racing fairing and sides foam filled for side impact
there is lots of better vidios from shore showing how much air they get
down straights,,,,
blast to drive
I built the hulls
modified glastron 166" bottom
with a single driver enclosed top deck with racing fairing and sides foam filled for side impact
there is lots of better vidios from shore showing how much air they get
down straights,,,,
blast to drive
Last edited by johnmiffco; 10-13-2014 at 01:15 PM.
