Offshoreonly.com
Page 6 of 8
« First
4
5
6
7
8
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   SeaDek for entire Cockpit floor of Center Console (https://www.offshoreonly.com/forums/general-boating-discussion/319473-seadek-entire-cockpit-floor-center-console.html)

pstorti 02-02-2015 10:21 PM
Originally Posted by NASCAT (Post 4259528)
In my case they'll be taking their shoes off then get on my boat in that order!! :D
Damn right!!!

And make sure their feet are clean!

pstorti 02-02-2015 10:24 PM
Originally Posted by jmoore1225 (Post 4259539)
I just want if for the cockpit, not so sure I want it premanently adhered tho. How is it with retaining water? I'd like the Faux wood in orange w/ the edges & lines in purple. Is that do-able anyone know?
It is peel and stick so it has to be permanent. But you can unstick and stick a new piece if it gets damaged.

Dries very quickly, and I don't think they have purple but look on the website I might be mistaken.

jmoore1225 02-02-2015 11:51 PM
Originally Posted by pstorti (Post 4259560)
It is peel and stick so it has to be permanent. But you can unstick and stick a new piece if it gets damaged.

Dries very quickly, and I don't think they have purple but look on the website I might be mistaken.
I looked at the color guide & they didnt have either color. Saw a few pictures where it looked like they had done some custom coloring. I sent them an email.

low_psi 02-03-2015 08:23 AM
Originally Posted by SLOWRIDE-388 (Post 4237087)
Here is ours on formula 350 cbr

We really like it.
Going to put it on the rear swim platform on a fountain this winter. Non teak look for it though.
Waves & Wheels does great on templates and installs.
This is the color we have settled on. Just waiting to get the boat out of hibernation.....

stimleck 02-03-2015 02:41 PM
Originally Posted by ICDEDPPL (Post 4209128)
How about if you make one template of the entire platform perimeter then use a blade to slice out the cut outs once installed? Should be easy

damdonzi 02-03-2015 02:54 PM
Originally Posted by NASCAT (Post 4259528)
In my case they'll be taking their shoes off then get on my boat in that order!! :D
It's so funny you wrote that. Our rule is shoes off and they all go under the rear bench. Nobody is allowed to board with shoes on. My seven year old son is the enforcer. He lets everyone coming aboard know what to do and where to put them.....even if they have been on the boats many times beforehand. Still cracks me up to hear him sounding like a flight attendent to our guests. Glad to hear I'm not the only one!

NASCAT 02-03-2015 03:00 PM
Originally Posted by stimleck (Post 4259841)
How about if you make one template of the entire platform perimeter then use a blade to slice out the cut outs once installed? Should be easy
+1 we use what is referred to as template paper here but it's basically just heavy construction paper available at most art supply stores. If it's held in one place you definitely can create the template.

NASCAT 02-03-2015 03:16 PM
Originally Posted by damdonzi (Post 4259847)
It's so funny you wrote that. Our rule is shoes off and they all go under the rear bench. Nobody is allowed to board with shoes on. My seven year old son is the enforcer. He lets everyone coming aboard know what to do and where to put them.....even if they have been on the boats many times beforehand. Still cracks me up to hear him sounding like a flight attendent to our guests. Glad to hear I'm not the only one!
I've seen many a boat w/ No Shoes Please decals on them. Won't find them on my boat, I'll be utilizing the same broken record ENFORCER method your son does! It will sink in fairly quickly for the repeat guests. Most are already beat down from joining me on my previous boat anyway!

ICDEDPPL 02-03-2015 07:31 PM
Originally Posted by stimleck (Post 4259841)
How about if you make one template of the entire platform perimeter then use a blade to slice out the cut outs once installed? Should be easy
I would think it would come out home made looking, I for sure am not good and steady enough to make it look good

mptrimshop 02-03-2015 08:06 PM
Originally Posted by ICDEDPPL (Post 4259967)
I would think it would come out home made looking, I for sure am not good and steady enough to make it look good
Your avatars are the best!!


All times are GMT -5. The time now is 11:27 AM.
Page 6 of 8
« First
4
5
6
7
8
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.