496 Mag/HO Goodies
10-02-2002, 07:29 PM
#71
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Bayley,
Sure will be at SEMA, booth number 22931. Down just past Ford.
Vyper, as for pricing, stage 1 will be more than $500, but should be less than $1200. All parts will also sold seperately, the engine cover, CMI headers, performance ECU cal, low temp thermostat and filter.
rv, were using the sport tube and thats going to be the only option at this time for the 496 with a calibration. As for power over stock, you'll see just under 5% by themselves, but the motor is prone to detonation because it's too lean on the top when the engine efficiency changes so I would not recommend doing it without recal'ing the computer.
For the 454Mag, we only have the SC system. Right now, were running a special on side mounted 454/502 Mag systems only, $4550 each, add $600 for the billet throttle body option.
Thanks,
Dustin
Sure will be at SEMA, booth number 22931. Down just past Ford.
Vyper, as for pricing, stage 1 will be more than $500, but should be less than $1200. All parts will also sold seperately, the engine cover, CMI headers, performance ECU cal, low temp thermostat and filter.
rv, were using the sport tube and thats going to be the only option at this time for the 496 with a calibration. As for power over stock, you'll see just under 5% by themselves, but the motor is prone to detonation because it's too lean on the top when the engine efficiency changes so I would not recommend doing it without recal'ing the computer.
For the 454Mag, we only have the SC system. Right now, were running a special on side mounted 454/502 Mag systems only, $4550 each, add $600 for the billet throttle body option.
Thanks,
Dustin
10-08-2002, 09:08 PM
#72
Registered
Join Date: Mar 2001
Location: Southwestern OH, USA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the long delay, but prices will be available by friday I'm hoping. The SC'd engine comes with new injectors, the standard performance cals with and without exhaust utilize the stock injectors and stock pressures. We will have updates for both the 375 and 425, but 425 first.
Dustin you are killing us.
Dustin you are killing us.
10-09-2002, 07:03 AM
#73
Fast Enough, you sure on the 'no injectors for the upgrades w/o SC'? I though Dustin said the 525 hp version was new injectors. Not sure how that much HP can be had w/o injector change since the duty cycle is pretty high already on the stock setup.
Rick
Rick
10-21-2002, 03:15 PM
#79
Registered
Join Date: Mar 2001
Location: Southwestern OH, USA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Hot Boat Mag
OK!! Now I have seen an add in Hot Boat Magazine with all the mods and still no pricing or when it will be available.
The PCM mod and the Cam look good to me. Well I still have 2 weeks to wait before I can get my PCM and see if I want to pull the engine to put a new cam in anyway. So I will continue to wait on Dustin
The PCM mod and the Cam look good to me.
Well I still have 2 weeks to wait before I can get my PCM and see if I want to pull the engine to put a new cam in anyway. So I will continue to wait on Dustin
