Notices

Good mud anchor

Thread Tools
 
Old 01-29-2015, 07:46 PM
  #1  
Registered
Thread Starter
 
Join Date: Aug 2012
Location: Grand Rapids, MI
Posts: 279
Received 0 Likes on 0 Posts
Default Good mud anchor

Guys, I have a 28b anchor for my 33' Scarab (dry weight 8400lbs) not unlike the one below. I do 90% of my boating in Spring Lake, MI, in mud. I get pushed around by the wind and wake, nearly hitting other boats/docks a couple of times, and that gets old fast. It holds me like a rock in Lake Michigan sand, but no good in mud. Any recommendations for an anchor that will stick better?

http://www.westmarine.com/buy/west-m...05_153_001_009
chris21hope is offline  
Old 01-29-2015, 07:57 PM
  #2  
Neno the mind boggler
VIP Member
iTrader: (1)
 
glassdave's Avatar
 
Join Date: Sep 2001
Location: toledo oh
Posts: 13,069
Received 271 Likes on 96 Posts
Default

how long of a rode do you have on it and roughly what depth is the water?



everyone swears by the box anchor but I have not had one yet. I have a Fortress FX-23 for my 38 thats been pretty tenacious in our Erie bay muck in the worst wind. I also have a smaller model of that anchor that I will set off the stern at times to keep it from swaying.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )

Last edited by glassdave; 01-29-2015 at 08:14 PM.
glassdave is offline  
Old 01-29-2015, 08:05 PM
  #3  
Registered
 
Join Date: Mar 2009
Location: Beaverton Or
Posts: 386
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by glassdave
how long of a rode do you have on it and roughly what depth is the water?
Exactly where i boat river with a current 10' of chain and 3 times the depth of the water....aka 30' of water 90' of line for that fluke type of anchor...The chain keep's the nose down so the flukes will dig in.
Pliant is offline  
Old 01-29-2015, 08:29 PM
  #4  
Registered
Thread Starter
 
Join Date: Aug 2012
Location: Grand Rapids, MI
Posts: 279
Received 0 Likes on 0 Posts
Default

Originally Posted by glassdave
how long of a rode do you have on it and roughly what depth is the water?



everyone swears by the box anchor but I have not had one yet. I have a Fortress FX-23 for my 38 thats been pretty tenacious in our Erie bay muck in the worst wind. I also have a smaller model of that anchor that I will set off the stern at times to keep it from swaying.
That FX-23 looks pretty solid.

Water depth where we hang out is 15 to 20 feet. I have about 12 feet of chain and a ton of line. I truly think my anchor sucks, but maybe I'm not putting enough rode in the water too....
chris21hope is offline  
Old 01-29-2015, 08:33 PM
  #5  
VIP Member
iTrader: (1)
 
Smitty's Avatar
 
Join Date: Apr 2001
Location: Chicago il
Posts: 4,213
Received 0 Likes on 0 Posts
Default

Do you throw your anchor or drop it straight down ?? And you need to put out a lot of line initially then you shorten it. Throwing the anchor is a bad thing. 90% of the time it will not set correctly. Drop it down and back up slowly.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Smitty is offline  
Old 01-29-2015, 08:38 PM
  #6  
Registered
 
Join Date: Sep 2012
Location: New Bern, NC
Posts: 616
Likes: 0
Received 0 Likes on 0 Posts
Default

I will sell you my old worn out 454, it will work great for a anchor.
Brandonb_05 is offline  
Old 01-29-2015, 09:31 PM
  #7  
SORE MEMBER
Platinum Member
 
Wobble's Avatar
 
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like on 1 Post
Default

Box anchors are great in the mud, but they are a bit ch to get up and then clean.
Wobble is offline  
Old 01-30-2015, 07:53 AM
  #8  
Registered
 
Join Date: Aug 2013
Location: SW MI
Posts: 157
Received 1 Like on 1 Post
Default

If you are in Spring Lake, just tie off to one of the cruisers or a raft off line. I wouldn't want my anchor in that sediment.

All kidding aside, with the currents, wind, and waves in Spring Lake, I would suggest a stern anchor. Set your bow anchor with bow into the wind and then place stern anchor slightly offset off the stern as to not allow the boat to swing. Every swing pulls on your main anchor. It is surprising how small of a stern anchor will accomplish what you need.

Now good luck making all this happen at 2:00 on a Saturday afternoon in one of the packed coves, along with someone not hitting your lines!
snowhammer is offline  
Old 01-30-2015, 07:59 AM
  #9  
Registered
 
Join Date: Sep 2010
Location: cleveland ohio
Posts: 353
Received 16 Likes on 9 Posts
Default

Originally Posted by chris21hope
Guys, I have a 28b anchor for my 33' Scarab (dry weight 8400lbs) not unlike the one below. I do 90% of my boating in Spring Lake, MI, in mud. I get pushed around by the wind and wake, nearly hitting other boats/docks a couple of times, and that gets old fast. It holds me like a rock in Lake Michigan sand, but no good in mud. Any recommendations for an anchor that will stick better?

http://www.westmarine.com/buy/west-m...05_153_001_009
anchor box works very good,but heavy and a little bit of a job to clean off before putting away
93 shooter is offline  
Old 01-30-2015, 08:48 AM
  #10  
Registered
 
Join Date: Jul 2013
Location: Plymouth, MI
Posts: 56
Received 1 Like on 1 Post
Default

Originally Posted by chris21hope
That FX-23 looks pretty solid.

Water depth where we hang out is 15 to 20 feet. I have about 12 feet of chain and a ton of line. I truly think my anchor sucks, but maybe I'm not putting enough rode in the water too....
Chris,

An FX-11 with 10' of chain held myself and a 280 all day on 4th of July in Spring Lake. I threw my west marine special, like your link, off the stern and we didn't even think of moving. Fortress is the brand to buy.
venmous28 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.