View Poll Results: When did your engine blow
Multiple Choice Poll. Voters: 61. You may not vote on this poll
When did your engine blow?
03-05-2015, 07:59 AM
#35
Learned the hard way that on a MEFI 3 system, when you are on the limiter trying to win a race 
, it pulls fuel back, not spark. 2 pistons were fried. Literally. Looked like they had been cut with a plasma cutter. Oooopsie.
, it pulls fuel back, not spark. 2 pistons were fried. Literally. Looked like they had been cut with a plasma cutter. Oooopsie.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
03-05-2015, 08:19 AM
#36
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Mine had a small backfire at first startup of the season about ten years ago, was going to a Good Friday Crawfish boil about 4 miles down the river. What I didn't know was that it blew a rubber plug off one of the small ports on the carb base plate. About half a mile into a 3000rpm cruise down the river it blowtorched a hole through number 2 piston.
Never saw the missing plug until I was putting engine back in boat. That was the moment I realized we had reduced the compression from 10.4 to 9.8 and timing for nothing!!!!!!!!! Son of a bittch.
Never saw the missing plug until I was putting engine back in boat. That was the moment I realized we had reduced the compression from 10.4 to 9.8 and timing for nothing!!!!!!!!! Son of a bittch.
03-05-2015, 02:17 PM
#37
VIP Member
VIP Member
Which time?
When we were drag racing it wasn't an uncommon to "wound" a motor. The button to arm the NOS was labeled "shark" because it eats everything. We were burning the spark plugs down every pass. I have an oil pan hanging in my pole barn that looks like someone shot it with a 12 gauge & it has a piece of the block still attached to it. We did that in Guelph, Ont. back in 2000 if I remember correctly. That was a great venue. I believe we were the only powerboats allowed on the water all year because it was a protected site of some sort.
s
When we were drag racing it wasn't an uncommon to "wound" a motor. The button to arm the NOS was labeled "shark" because it eats everything. We were burning the spark plugs down every pass. I have an oil pan hanging in my pole barn that looks like someone shot it with a 12 gauge & it has a piece of the block still attached to it. We did that in Guelph, Ont. back in 2000 if I remember correctly. That was a great venue. I believe we were the only powerboats allowed on the water all year because it was a protected site of some sort.
s
__________________
There are 2 types of people in this world:
1. Those who can extrapolate from incomplete data.
There are 2 types of people in this world:
1. Those who can extrapolate from incomplete data.
03-06-2015, 06:53 PM
#40
Registered
Join Date: Jun 2006
Location: L.I.,N.Y.
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
