|
When the first one comes off the dyno.
|
Originally Posted by 1000 islander
(Post 4306834)
When the first one comes off the dyno.
|
Probably two weeks. Only pieces we are waiting on are my carburetors and stud girdles. I bit off a little more than I could chew doing three of these I think. lol
|
The only parts I reused from my old motors are the blocks and the ignitions. My UPS man is just starting to speak to me again after carrying 3 crankshafts, 3 sets of heads, and 3 of everything else.
|
Originally Posted by mike tkach
(Post 4306629)
without cam specs and compression ratio it is just a guessing game i,m not a good guesser so i will just wait for the dyno results.
Should make 1.25 to 1.32 HP per cubic inch so long as the compression isn't 10:1+ and the cam isn't too narrow of a LSA. |
How much difference in hp between the three motors?????????:)
|
I call a 2% spread, 14hp.
|
Your heads and valve train are the same as mine with bob's cam 112 center line, 714hp @ 6,000rpm, mine is a 555ci, with cnc cambers.They will sound good with dry exhaust.
|
683 @ 5800 rpm :-)
|
Updates?
|
| All times are GMT -5. The time now is 03:18 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.