deemo99

Does the chrome hub/bearing cover come off from the inside or by pulling or prying like the covers on some Ford wheels?

Before I go and damage it by being dumb, I thought maybe I'd ask on here.

[ATTACH=CONFIG]542937[/ATTACH]

Thanks,
Dave

vista268

i believe you need to take the wheel off. It slides in from the inside....

Powerquest230

Should pop off, might pull one wheel off to verify before using the rubber mallet.

ICDEDPPL

iTrader: (1)

Yup, has a lip behind the wheel

hogie roll

Hook a strap to it and yank with your quad.

Sydwayz

iTrader: (1)

Sometimes, they can get a little corroded, and not want to come out. You may want to lay the wheel flat on the ground, backside down, lay a small 2x6 across the front of the center cap, and tab it down/out the back with a rubber mallet or dead blow hammer.

deemo99

Thank you everybody, I appreciate it.

I'll get my quad fired up

I can confirm that if you're wiping excess grease from the inside of that hub you can cut the ****e out of your finger!