Wellcraft experts needed
#1
Registered
Thread Starter
Join Date: Aug 2015
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Wellcraft experts needed
I am looking for a hull to rebuild into a pilot house dive boat with twin 300's. I am considering a couple hulls and looking for info. and advise on them
-Scarab III 340 - What is the difference between this and the raider?
-Scarab raider 34 - What is the head room in the forward cabin area?
-Scarab 38KV - What is the dry weight of this hull and any idea what kind speeds or more importantly how much weight could it hull with twin 300 outboards?
Thanks!
-Scarab III 340 - What is the difference between this and the raider?
-Scarab raider 34 - What is the head room in the forward cabin area?
-Scarab 38KV - What is the dry weight of this hull and any idea what kind speeds or more importantly how much weight could it hull with twin 300 outboards?
Thanks!
#2
Registered
Join Date: May 2005
Location: Abingdon md
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
The scarab III 340 is a raised deck that came with stern drives
The scarab raider was a flat deck with outboards.
The max headroom on my scarab III was 5' 2" and tapered down towards the vberth to about 4'6" so I would think the headroom of the raider being a flat deck would be about 4' 6" or less.
The dry weight of the 38kv is listed at 7000lbs with twin stern drives, seems kind of light to me.
Hopes this helps.
The scarab raider was a flat deck with outboards.
The max headroom on my scarab III was 5' 2" and tapered down towards the vberth to about 4'6" so I would think the headroom of the raider being a flat deck would be about 4' 6" or less.
The dry weight of the 38kv is listed at 7000lbs with twin stern drives, seems kind of light to me.
Hopes this helps.