|
Originally Posted by green lightning
(Post 4360100)
They are not that bad at all , the only problem you might have is drilling the holes for the extension boxes just make sure they are straight and the boxes will go on real easy
|
Originally Posted by Marginmn
(Post 4360116)
If it's a staggered application they may have to full in the notch to allow them to be mounted low enough.
|
Bought them for my 04 T/S Gun, Rik has answered all the questions that we have had. He said the notch is fine just to drop them down as low as possible. What props are you spinning?
|
1 Attachment(s)
Originally Posted by green lightning
(Post 4360120)
When the zrc full staggered boat was done small pods were made to cover the front of the boxes so they would not drag in the water
|
Originally Posted by Marginmn
(Post 4360162)
Like that?
|
Originally Posted by Drake22.250
(Post 4360131)
Bought them for my 04 T/S Gun, Rik has answered all the questions that we have had. He said the notch is fine just to drop them down as low as possible. What props are you spinning?
|
Originally Posted by green lightning
(Post 4360166)
Were yours bolted on
|
Originally Posted by Marginmn
(Post 4360178)
I think bolted on and then fiber-glassed over.
|
Originally Posted by green lightning
(Post 4360179)
The one that was done here was installed the same way , seemed to work real well
|
Marginmn, with a staggered setup and the arnesons doesnt that have a ton of stern lift? Is that why you want to go with the 18* rake props?
|
| All times are GMT -5. The time now is 07:31 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.