Start to Finish: Building Our 50' Skater
#61
Registered
Great project Tyson. I know you have just about lived at Skater lately. Lol
#63
Registered
In this picture the hull is upside down because we were changing the bottom to give the bow more lift. I'm running Arnesons and they do not have the leverage to lift the nose like a #6 does.
[ATTACH=CONFIG]552199[/ATTACH]
[ATTACH=CONFIG]552199[/ATTACH]
#64
Registered
The deck piece is on the boat for bonding in place. The bottom of the tunnel extension is installed.
[ATTACH=CONFIG]552200[/ATTACH][ATTACH=CONFIG]552201[/ATTACH][ATTACH=CONFIG]552202[/ATTACH]
[ATTACH=CONFIG]552200[/ATTACH][ATTACH=CONFIG]552201[/ATTACH][ATTACH=CONFIG]552202[/ATTACH]
#66
Registered
VIP Member
Join Date: Oct 2008
Location: Belle River, Ontario / Lake St. Clair
Posts: 321
Likes: 0
Received 1 Like
on
1 Post
This is absolutely incredible what you guys are building & planing out. Congrats & I am looking forward to seeing future updates!
Looks like you have room for a Heli. pad on the deck
Looks like you have room for a Heli. pad on the deck
#67
Registered
The nose of the boat is starting to take shape.
[ATTACH=CONFIG]552205[/ATTACH][ATTACH=CONFIG]552206[/ATTACH][ATTACH=CONFIG]552207[/ATTACH][ATTACH=CONFIG]552208[/ATTACH][ATTACH=CONFIG]552209[/ATTACH][ATTACH=CONFIG]552210[/ATTACH][ATTACH=CONFIG]552211[/ATTACH]
[ATTACH=CONFIG]552205[/ATTACH][ATTACH=CONFIG]552206[/ATTACH][ATTACH=CONFIG]552207[/ATTACH][ATTACH=CONFIG]552208[/ATTACH][ATTACH=CONFIG]552209[/ATTACH][ATTACH=CONFIG]552210[/ATTACH][ATTACH=CONFIG]552211[/ATTACH]
#68
Registered
The windshield retainer and deck hatches installed, we put the deck hatches as far back as we could so when we stuff it through waves they will have less of a chance of crushing in.
[ATTACH=CONFIG]552212[/ATTACH][ATTACH=CONFIG]552213[/ATTACH][ATTACH=CONFIG]552214[/ATTACH][ATTACH=CONFIG]552215[/ATTACH][ATTACH=CONFIG]552216[/ATTACH]
[ATTACH=CONFIG]552212[/ATTACH][ATTACH=CONFIG]552213[/ATTACH][ATTACH=CONFIG]552214[/ATTACH][ATTACH=CONFIG]552215[/ATTACH][ATTACH=CONFIG]552216[/ATTACH]
#70
Registered