8-71 Blower Shop Blowers
#1
Registered
Thread Starter
Join Date: Apr 2002
Location: Salisbury
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
8-71 Blower Shop Blowers
Two new 8-71 in the box for sale, Complete Kits Intakes, Pulleys, Belt, Carb Adptor,
LOW PRICE NEED TO GET THEM OUT OF INVENTORY!!!!!!
$2,800 each
LOW PRICE NEED TO GET THEM OUT OF INVENTORY!!!!!!
$2,800 each
#2
Registered
How much for just the blower .
#5
Registered
Thread Starter
Join Date: Apr 2002
Location: Salisbury
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
8-71
The Blowers We have in parts, have intakes for Big Block Chevy.
The pulleys that we have for them are 55/48. The Ratio the way we were going to set them up is -12.73% with the 55 on top, that would make these blowers over/driven. Without knowing your cubic inches, cam lift,cam duration and heads it is hard to determine the boost PSI, but on most 540cu in motors this setup is good for about 4 to 5 psi. The carb adaptors are for 2 holley 850. We use blowershop intercollers and have them for $1850. Hope this helps have a great day !!! Call if you have any questions 704-639-1298
The pulleys that we have for them are 55/48. The Ratio the way we were going to set them up is -12.73% with the 55 on top, that would make these blowers over/driven. Without knowing your cubic inches, cam lift,cam duration and heads it is hard to determine the boost PSI, but on most 540cu in motors this setup is good for about 4 to 5 psi. The carb adaptors are for 2 holley 850. We use blowershop intercollers and have them for $1850. Hope this helps have a great day !!! Call if you have any questions 704-639-1298
Thread
Thread Starter
Forum
Replies
Last Post
B38
General Boating Discussion
13
05-22-2007 02:38 PM