|
Originally Posted by DBleil89
(Post 4432582)
You just can't live that one down. Just when you thing they forgot glassdave brings it back up again!
|
Did you get those holes drilled yet?
|
Getting ready to put k planes on my 26 scarab horizontal. Seems like all I've read that the boat will handle better at speed. And you know I'm putting big bravo shredding power in it!
|
Originally Posted by rws
(Post 4442918)
Did you get those holes drilled yet?
|
Originally Posted by phragle
(Post 4443108)
Saturday is looking to be the day... Gonna drg it over to daves to lay them out as my ability to do anything in a straight line is severely limited. I waas going to do it last sunday but I got sidetracked going to kelly's with RT930 in his 47 beaker.
|
For what's it's worth, I built a template and mounted a 3/4" flange and nipple to guide the drill bit at the transom angle for the large thru hulls. Mounted the tabs with thru holes then used brackets for 3/8" holes.
I've missed one in the past and hated patching a new transom! |
Originally Posted by phragle
(Post 4443108)
Saturday is looking to be the day... Gonna drg it over to daves to lay them out as my ability to do anything in a straight line is severely limited. I waas going to do it last sunday but I got sidetracked going to kelly's with RT930 in his 47 beaker.
|
1 Attachment(s)
Well this is what I came up with....
[ATTACH=CONFIG]556005[/ATTACH] |
Looks unfinished to me.
|
Originally Posted by Black Baja
(Post 4444182)
Looks unfinished to me.
|
| All times are GMT -5. The time now is 07:25 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.