1MOSES1

Btw I have heard several 496 reversion horror stories. Know a few personally too...bent rods aren't a good look.

Nate5.0

We're did I say I would put blacks in a 38 sir?

I will wait here while you find that post........

1MOSES1

Waiting for the 496 pipe...you gonna pass it soon?

Nate5.0

That's about as normal as a 1000 hr 525 that has not been opened up. Again....there is always exceptions to the rule on both sidea.

Nate5.0

This is what you come back with after stating something I never said.....take a 5 and come up with something better than that bud

02RedWS6TA

Just picked up a 33' boat with black motors. Would've went for 496's over 502mpi's but couldn't find one. Turned down a couple blue motor boats because of all the reasons listed here. I'd rather be on the water going 75 than the boat in the shop going 0. 80-85 with blues would be fun but not worrying about valves or as much about drives is worth 5-10mph to me.

class6

Have you ever priced a 525 or 500 Bulldog Block only. Its Crazy what Merc wants!
And Reversion on most 496s are from boat ramps that are too steep and not exhaust or cam problems

1MOSES1

Better tell my friend with a cobalt who only uses a travel lift to get in the water...

ratedx

So The boat i am considering is a repo boat w/525's- there is no receipts or docs for upper rebuilds-so i think it may be risky- I own a grea t07 35ZR Donzi with 496's with low hours - i value it at 75-80k the other donzi is a 2005 w/525's with 330 hours but no paperwork/service etc. they want 90-95k so lets say i am spending extra 10k to get the higher HP Donzi what do you think?

donzi matt

iTrader: (1)

No flaps on the tips, no turbulators in the exhaust, no signs of reversion when I pulled the heads off my 496 HO's.

But what would I know, I'm just one of those idiots with a 35 foot boat with black motors that start and run every single day.