![]() |
ocean express cats???
how much is a mid 80s 39' express cat (12' beam) with asd1600 drives and fresh 0 hour 1000hp 600cid blower moters worth assuming its in good condition with updated dash interior and no graphics (plain white imron) with a dual wheel tandem trailer?
|
Is this nick's boat with the one counter rotating drive if it is I know the boat . I know nick said he was doing alot of updating to it last time we had talked I new that boat personaly when it was in michigan it used to have ssm#4 on it then mark put on the arenson drives nice pleasure boat , Anwers 80 to 100k.
|
nope not nick's boat. i don't even know who nick is? 80 to 100k is a nice figure. Is it sellable? I fi buy this thing if i want to get our frmo under it next year will i be able to move it? Or am i going to be sitting on something that is hard to sell (regaurdless of price)? FYI I can pick it up for less than 80k.
|
puder,
where can you get a 39 express thats been updated and has arnesons and 1000hpX2 for under 80K? If you dont buy, could you let me know, thanks. |
i got pictures she's rough, very rough.
1987 needs an interior and a total rerigging. All eth parts are "with" the boat just not "on" the boat. Its basically a kit. Allparts are there nothing is assembled. I was planning on doing the updating..... I am just tryign to get an idea of how much its worth so i can bargain on it. I know how much work it needs ($$$$) but i want to figure out how much i can pay for it and not loose my shirt. |
ahhhh, i see i see, you can still so some pics over and the info if you dont buy it, i might bite
would he seperate the boat from the engines do you know? |
Puder, is this boat in PA. ? Viciousone is your mark from fl.?
|
Originally posted by puder nope not nick's boat. i don't even know who nick is? 80 to 100k is a nice figure. Is it sellable? I fi buy this thing if i want to get our frmo under it next year will i be able to move it? Or am i going to be sitting on something that is hard to sell (regaurdless of price)? FYI I can pick it up for less than 80k. brendaan, nick is my brother!!!!!!!!!! |
How about a 1990 38' Cougar Cat with Arneson's, already rigged, has canopies, with your choice of power from stock 502's, 800 horse Mercury Class 1's, Keith Black aluminum 900 horse Oldsmobile with fuel injection or 1100 horse 572 inch blower motors for under $80G?
|
i kind of wanted project boat :D But how much are you talking for the Couger with 1000hp engines? What kind of setup does it have? Cabin? Ex race boat? WHat kind of canopies? Full? 1/4? Pod? Does it have a trailer?
Slingshot, i though he was reffering to another nick. I didn't thinks his boat had SSM4 on it origonally. So i didn;t connect it. What can i say i'm a spaz. |
Puder,
Looks like we are in the market for the same kind of boat:D I perfer no motors or drives, but you know we dont always get what we want. Did you check out the Jag. cat in the OSO classifieds. RBS1997, yes can you please post or email the run down on it, if puder doesnt buy, i will look at it. |
HI Puder , Chances are it will need new fuel tanks . Mine did . WHat a pain ! Everyone wanted $10k to do the tanks . I paid $2k for the tanks (and got screwed !! DON'T USE ATLANTIC COASTAL WELDING IN NJ !!! THEY CHEAT STEAL AND LIE !!!!) and did the work myself . That job SUCKS !! The boat itself I love and everyone that has one seams to like them . Extremely tight in the engine room !! Does it have anywater damage ? Look closely . Check under everything for dark or soft fiberblass . Can't realy help to tell you if you can sell it or not . Not sure how desirable it is . I'm sure if it was in the right place it would go with that power being fresh . As long as the boat looks the part . (GAuges, steats cabin etc) . Good luck . Thats alot of boat !! You got somewhere to work under cover ? You don't want anymore water getting to it then what already may have . Let me know if I can help . JOE
|
Puder check your mail !!;)
|
Boot, Should have called me on those tank's I could of had them built for 1400.00 a piece, around that tank area is a real water catch aera, Boot wich 39' did you buy?
|
38' Aluminum (It's recyclable) Cougar on a Mayco dual tamden trailer, don't need no new fuel tanks thank you, and if your looking for a project boat I can take it all apart for you before you buy it.
go to www. arneson industries. com click "Which Arneson Surface Drive Do I Have ? " go to ASD8 16" Drop Box hit the red pix Gee that gives you a great shot of the boat!! Now called COPY CAT it's an ex race boat in excellent condition, You need to call Errol Lanier in Florida, He was throttle man when it last raced. I have some pix i'll try to post tomarrow along with Errol's number |
did my thread get deleted about my bros cat?
|
1 Attachment(s)
Slingshot, I haven't seen your post on your brothers cat , How's he and it doing ??
Visious , I bought PAul Smiths boat from Wolverine Bronze. It was sitting at Miller marine for a while . IT had some issues but they are getting worked out . |
:cool: i've been calling around....
FYI i'm all paranoid about saying too much about the boat (in case you'all hadn't noticed) I had project boat stolen from under me two years ago and if i go for this one it NOT going to happen again. If i do wind up passing on it i will gladly divulge all info to all interested persons. (evil laughing as i attempt to scrape toghether enough sheckles and find a place to store this monster :D ) |
[IMG]runcat.tif[/IMG] trying to post pic of my 39 ocean i s__k at this
|
Reno's
|
tiz, i left a message on your voice mail. I didn't call till late. i will try again tommorow, I am stupid busy with work. as a mater of fact i am just now gettign sleep at 2:30am and i'm not even close to done yet!!!!:mad:
|
EXPRESS 39'
MARK,
IF YOU ARE LOOKING FOR A CAT MY BRO HAS ONE COMPLETELY RE GEL COATED. EVERYTHING WAS STRIPPED, NEW INTERIOR FROM AL'S(OUTERLIMITS) WITH SKATER FIVE MAN BACK SEAT, ARNESON ASD 1600'S COMPLETELY REBUILT BY RIK WIMP @ ARNESON AND TOTALLY POWDERCOATED, ROCKER PLATES, FRESH 572/900HP+ ZUL ENGINES ALL EICKERT ACCS, 3 STAGE PUMPS NEW INTERCOOLERS, STELLINGS, MSD IGNITION,TRI AXLE TRAILER....ANYWAY IF YOU ARE INTERESTED __________________ |
Puder, Got your message late but had ta pack. Im leaving for fl. this afternoon. I'll have phone on after 7:30 feel free to call.:cool:
Trying to post pic of my boat but can't. Packinair post one for me. :confused: |
Puder,
Gimme a call...I've got a couple of boats you may be interseted in...Jake the Snake is for sale again and Ocean Commotion is going CHEAP!!!! 516 455 1200 |
seasn got yoru messga ebeen workign liek mad all day trying to get ready for meeting and then my client cancelled on me.
i might be interested in the snake but i'm not paying much for it. It got another season of use and god knows how manyhours of how they were put on. It kind of scares me when someone butya boat runs ita season and flips it right away. Maybe they sold it so quick cus they kicked the snot out of it.... not saying they did, but then again i don't know otherwise. liek i said if they can deal cheap.... ocean commotin got any pics? Doe sit have any cabin at all??? I am kind of on a cat kick now... |
Jake's new owner usually runs stuff for a season and then sells it...it just the way he is...
the boat which I think would interest you more is Ocean Commotion...it is a 38 Competition Scorpion. I forget what the interior is like...I know it has a 3 man bolster and a back seat...the motors are 502s and its got #3s and no trailer...you may be able to get it without the motors...35K It's gonna need paint and interior work, but it is a proven wave crusher! Lemme know if yer interested... |
1 Attachment(s)
heres tizbads . . . . .
|
dan dave i didn't know you painted his boat. it looks awesome!!!!
i think i woudl go very minimal on ethgaphis mayeb some simple tribal stuff (I would design it) if you out this way perhaps you'd be interested in doing some paint work. |
Puder, don't you already have a project boat that has yet to get wet? Or did I miss something?
|
yep, you can't have too many projects. If i get a few days off from working I coudl get her back together. I have all the parts i just need 5 days to put her back together.
The goo dnews i am swamped with work at that mean $$$ the bd news is i don;t have crap for time to work on my boat. :( |
Boot, I know Paul well, That's a nice old 39', That used to be Dennis Richard's boat from Richard's machine product's in New York, He has a 48' Express he had it for sale last time I taked to him which has been a few year's, 39' has alway's been my favorite!! Spark.
|
38' Cougar with Arneson ASD8
|
1 Attachment(s)
38' Cougar with ASD8
|
1 Attachment(s)
800 horse class 1 Merc
|
thats looking awfully like a full on race boat.
cool but not exactly what i'm looking for. I would like to seat more than 2 people (my boat repair skills are not exaclty up to a full pleasure conmversion for a race boat). And a small cabin is nice too. |
1 Attachment(s)
The boat
|
1 Attachment(s)
Cockpit with canopy
|
1 Attachment(s)
motor cover
|
1 Attachment(s)
Engine bay with dry sump tank
|
1 Attachment(s)
Another 38' Cougar under constrution
|
| All times are GMT -5. The time now is 08:12 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.