Canale Takes Ownership of Sonic Powerboats
#12
Registered
Joined: Jul 2005
Posts: 15
Likes: 0
(Jay Ross stayed on as COO & Executive VP through 2002)
March 26, 1999- April 29, 2005: Richard Hewitt, III
2006-2007ish - Aug 2010: CSI Marine Group, Lenny
Sept 2010 - Dec 2016: Anthony Frisina , Arrow Power Boats, LLC
January 2017- Tony Canale, Canale Marine
#13
Registered

Joined: Jun 2005
Posts: 11,904
Likes: 1,143
1980-1999: Founder: Jay Ross
(Jay Ross stayed on as COO & Executive VP through 2002)
March 26, 1999- April 29, 2005: Richard Hewitt, III
2006-2007ish - Aug 2010: CSI Marine Group, Lenny
Sept 2010 - Dec 2016: Anthony Frisina , Arrow Power Boats, LLC
January 2017- Tony Canale, Canale Marine
(Jay Ross stayed on as COO & Executive VP through 2002)
March 26, 1999- April 29, 2005: Richard Hewitt, III
2006-2007ish - Aug 2010: CSI Marine Group, Lenny
Sept 2010 - Dec 2016: Anthony Frisina , Arrow Power Boats, LLC
January 2017- Tony Canale, Canale Marine
Safe to say, Jay owned it when it was the most profitable and fun from the lower costs to the colorful clients and their suitcases full of cash.
#15
So, does Canale own EVERYTHING, including the "42 HyperSonic" that Bondo here promoted?
As well as the Sonic Cat molds? (the Target derivative)
[ATTACH=CONFIG]563830[/ATTACH]
As well as the Center Console molds?
This is where some things get confusing.
Frisini was building the "whole line" which included Spectre and Sonic. If I remember correctly, the Spectre CATAMARAN molds went back to Gary Smith.
So, Frisini is no longer? Is that all correct?
As well as the Sonic Cat molds? (the Target derivative)
[ATTACH=CONFIG]563830[/ATTACH]
As well as the Center Console molds?
This is where some things get confusing.
Frisini was building the "whole line" which included Spectre and Sonic. If I remember correctly, the Spectre CATAMARAN molds went back to Gary Smith.
So, Frisini is no longer? Is that all correct?
#16
And...
The "Vendetta" which was produced by Frisini from the Adrenaline molds....
[ATTACH=CONFIG]563831[/ATTACH]
[ATTACH=CONFIG]563832[/ATTACH]
Do these molds now make up the renewed Adrenaline Powerboats? (which is also out of the Atlanta area)
http://www.adrenalinepowerboats.com/
The "Vendetta" which was produced by Frisini from the Adrenaline molds....
[ATTACH=CONFIG]563831[/ATTACH]
[ATTACH=CONFIG]563832[/ATTACH]
Do these molds now make up the renewed Adrenaline Powerboats? (which is also out of the Atlanta area)
http://www.adrenalinepowerboats.com/
#19
Boat molds are often an independently owned asset, that can be leased or owned by a holding company or the like. Accordingly that's why you see BlahBlah boats by Timkuktu Marine, or some other name convention derivative. I seem to remember something like you suggest above as well WRT to Sonic.
#20
VIP Member

Joined: Jan 2003
Posts: 930
Likes: 1
From: Tucson,Az.
So, does Canale own EVERYTHING, including the "42 HyperSonic" that Bondo here promoted?
As well as the Sonic Cat molds? (the Target derivative)
[ATTACH=CONFIG]563830[/ATTACH]
As well as the Center Console molds?
This is where some things get confusing.
Frisini was building the "whole line" which included Spectre and Sonic. If I remember correctly, the Spectre CATAMARAN molds went back to Gary Smith.
So, Frisini is no longer? Is that all correct?
As well as the Sonic Cat molds? (the Target derivative)
[ATTACH=CONFIG]563830[/ATTACH]
As well as the Center Console molds?
This is where some things get confusing.
Frisini was building the "whole line" which included Spectre and Sonic. If I remember correctly, the Spectre CATAMARAN molds went back to Gary Smith.
So, Frisini is no longer? Is that all correct?
I do wish Canale the best but there is a lot past stigma that he has inherited.






