|
Originally Posted by Mseuro
(Post 4525548)
I have a tool!
|
Originally Posted by Pol83x
(Post 4525741)
I just looked at a Matco one. 3/8" drive claims 200 ft/lbs. measured right about 3 1/2 inches from back of head to tip of anvil. $400. said they don't make a 1/2"
|
As I said earlier, if the coupler bolts aren't boogered up and the coupler to shaft nut can be loosened, you can put any kind of spacer in and retighten coupler to break it loose. Really hard to understand the issues without actually being hands on or in as the case may be . Good luck sir!
|
| All times are GMT -5. The time now is 10:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.