Mercury Racing unveiled a new propeller for the company’s two most powerful current Verado offerings—the 400R, 400R Carbon Edition and the ROS (Race Offshore) models.

https://speedonthewater.com/in-the-n...d-ros-outboard

why such a low rake??? I like bow lift while keeping the trim neutral.

I think they have the low rake because all the center consoles don't need help with bow lift with 3-6 verados on the back of the boat.

I find it funny how for years the bravo 1 prop was only offered in two inch increments. Now these props they keep coming out with for the beloved verados have .5" increments!

$5800 for a prop-YIKES!!!!!

What shaft is actually in it then?

Thank you sir.

My guess is these props are geared more towards the 30-36' cats not really marketed to the CC

.


Note: old thread


the article says the 400R Merc Racing CNC props goes upto 34" pitch. What if we need higher pitches like 36"?






.

Hard to believe with a normal loaded 30+' outboard cat. Acceleration already not good and most speeds to date with very light load on the limiters.

Maybe with some more HP via a higher rev limiter of 7400rpm. Who knows LOL

The acceleration in a DW 32/400R boat is amazing with all the amenities on board. Consistent low 120's with 2 guys and 60+ gallons too. No one believes it until they ride in one but it's the truth. Stock motors!!